Hi guys
Can any one tell if a gearbox from a 1978 320/6 would fit a 1982 320/6?
I wasn’t sure if there were differences between them
Maybe the mating flange?
320/6 gearbox
- uwbuurman
- E21 VIP
- Posts: 18664
- Joined: Fri Jun 12, 2009 4:49 pm
- My E21(s): 1978 type 1 323i 5speed dogleg Polaris
- Location: Ljouwert
Re: 320/6 gearbox
Aslong as it is an m20 gearbox you are ok. All m20 boxes fit all m20 engines. Only pint is that older bmw's get their speedo signal from the gearbox. This goes for the e21 and e12 for example. So those boxes have the mechanical speedo cable hole.
In short, 1978 320/6 box fits the 1982 m20 perfect.
In short, 1978 320/6 box fits the 1982 m20 perfect.
-
- E21 Fanatic
- Posts: 229
- Joined: Wed Jun 06, 2012 11:31 pm
- My E21(s): 83 316 1.8
82 320/6 - Location: Essex
Re: 320/6 gearbox
Ah ok so all e21’s are mechanical speedo??
You can't polish a turd.... but you can roll it in glitter!!!!
-
- E21 Fanatic
- Posts: 229
- Joined: Wed Jun 06, 2012 11:31 pm
- My E21(s): 83 316 1.8
82 320/6 - Location: Essex
Re: 320/6 gearbox
Lovely cheers for the help
You can't polish a turd.... but you can roll it in glitter!!!!