I've joined the club

Jack25
Newbee
Posts: 15
Joined: Thu Mar 24, 2011 8:39 pm
Location: Gloucestershire

I've joined the club

Post by Jack25 »

I've wanted an e21 for about 3/4 years now but have been led astray by a merc 190e and an e36. I liked the 190e but it was too slow. I like the e36 and still have it, but it's a little too modern for my tastes so I was on the look out for an older bmw. I had almost ruled out an e21 as the prices have been climbing for a while now and I thought I wouldn't be able to afford one I wanted but then Mark's old m42 powered 316 came up on ebay for a price I couldn't turn down. This was about a month ago and after a few hiccups it arrived this morning!


Covered it ice. It appears its london is colder than it is in gloucestershire.
Image

Image


Took those pics this morning before I had to leave for work.
When I got home today I tried putting the seat in but it looks like you left the frame from your other seat in there Mark, so I am going to have to make a new frame for my seat tomorrow. Let me know if you want the frame back as I'll probably just make a fixed one for now.
Other than that I've so far just had a good poke around, looked under the bonnet, admired the pink samcos, questioned whether my masculinity was up to that challenge and ran it up to temperature. Revved it a bit (sounds nice) went to put the bonnet back on and couldn't get it to fit properly so got distracted by that and spent a while straightening that out. By the time I was finished I was freezing and hungry so that's where I left it for now.

Can not wait to drive it :launch


User avatar
e21-Mark
E21 Master
Posts: 5715
Joined: Fri Mar 21, 2008 2:19 pm
My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
Facebook page: https://www.facebook.com/JackyardBackoff
Location: Cornwall - UK

Re: I've joined the club

Post by e21-Mark »

Welcome Jack. 8)
User avatar
Peter V.
E21 VIP
E21 VIP
Posts: 11986
Joined: Sun Mar 30, 2008 12:42 pm
My E21(s): '82 320/6
Location: Breda, Nederland

Re: I've joined the club

Post by Peter V. »

Welcome here. You have bought a nice tuned E21. Have fun with it. :thumbsup
Gr Peter V.

.Some say he eats nuts and bolts for breakfast, all we know is he is called the carburetorman.

BMW E21, 1981 320/6 Ascot Grau.
BMW E85, 2004 Z4 2.5i Sterling Grau.
BMW F31, 2017 320dA EDE Luxuryline Mineral Grau.
User avatar
Jeroen
Site Admin
Posts: 29194
Joined: Tue Sep 14, 2004 12:23 pm
My E21(s): '81 323i Baur
Location: The Netherlands
Contact:

Re: I've joined the club

Post by Jeroen »

Welcome and congrats on a nice buy, well known driver's car! Hope u don't mind I'm moving this thread to the 4 cil subsection though...
Regards/groeten, Jeroen
User avatar
e21-Mark
E21 Master
Posts: 5715
Joined: Fri Mar 21, 2008 2:19 pm
My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
Facebook page: https://www.facebook.com/JackyardBackoff
Location: Cornwall - UK

Re: I've joined the club

Post by e21-Mark »

Good memories. ;)

Image

Image

Image

Image

Image

Image

Image
User avatar
Jeroen
Site Admin
Posts: 29194
Joined: Tue Sep 14, 2004 12:23 pm
My E21(s): '81 323i Baur
Location: The Netherlands
Contact:

Re: I've joined the club

Post by Jeroen »

:thumbsup :thumbsup :thumbsup :thumbsup :thumbsup :thumbsup :thumbsup
Regards/groeten, Jeroen
Jack25
Newbee
Posts: 15
Joined: Thu Mar 24, 2011 8:39 pm
Location: Gloucestershire

Re: I've joined the club

Post by Jack25 »

Update:

Seats in properly now. The frame took a little longer than expected to make as I wanted the seat lower than the mounting on the existing boxed sections would allow. It's now mounted level with the lower box next to the trans tunnel and I think it's about right where it is now.
Took it for a test drive to find the front brakes were really lacking. Wasn't really sure what was causing it so took the brakes apart and found the pads were worn to such an extent the maximum extension on the calipers was only gently braking. As a temporary fix I cut out a few brake pad sized bits of sheet aluminum to space the pad in a bit and give me some braking. New yellowstuff pads are on order.
Also in the post right now is a new steering wheel and quick release boss. I originally went searching for a spacer to bring the steering wheel closer to me but got carried away :mrgreen:



Today I took part in an auto test. Was the only rear drive car there so won my class :shake Though overall I came second to last lol. Probably had more fun than anyone else but the slow speed stuff with no power steering was hard work.

Sorry about the quality of the pics. I left my dad to it and out of the hundreds he took these 2 are the only ones worth showing and I also got a video.

Image

Image

http://www.youtube.com/watch?v=RXxnS9mv ... e=youtu.be
User avatar
Jeroen
Site Admin
Posts: 29194
Joined: Tue Sep 14, 2004 12:23 pm
My E21(s): '81 323i Baur
Location: The Netherlands
Contact:

Re: I've joined the club

Post by Jeroen »

Copy the ID code between youtube brackets and it'll embed your vid like this:

code RXxnS9mv7XU in between [youtube][/youtube] and get

Regards/groeten, Jeroen
User avatar
e21-Mark
E21 Master
Posts: 5715
Joined: Fri Mar 21, 2008 2:19 pm
My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
Facebook page: https://www.facebook.com/JackyardBackoff
Location: Cornwall - UK

Re: I've joined the club

Post by e21-Mark »

Excellent. Great to see an e21 in competition.

For future reference Hawk pads are way better than EBC.
m3gaz
E21 Fanatic
Posts: 406
Joined: Sun Jul 06, 2008 7:46 pm
My E21(s): looking
Location: Bexley Kent

Re: I've joined the club

Post by m3gaz »

blimey,Mark.I thought the throttle linkage would have been worn,not the pads. :loll
There's one out there with my name on it.
User avatar
e21-Mark
E21 Master
Posts: 5715
Joined: Fri Mar 21, 2008 2:19 pm
My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
Facebook page: https://www.facebook.com/JackyardBackoff
Location: Cornwall - UK

Re: I've joined the club

Post by e21-Mark »

I'm innocent (although guilty of not checking them since cars last outing at Lydden with previous owner). Shame Jack didn't give me a call as I could have hooked him up with some pads.
Jack25
Newbee
Posts: 15
Joined: Thu Mar 24, 2011 8:39 pm
Location: Gloucestershire

Re: I've joined the club

Post by Jack25 »

Thanks guys.

Mark, do you have a product number for the hawk pads? It took me ages to find the right ebc pads. Went to a local shop and they had nothing like them so ended up going through the online catalogue looking for any which looked right and eventually found them.
User avatar
e21-Mark
E21 Master
Posts: 5715
Joined: Fri Mar 21, 2008 2:19 pm
My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
Facebook page: https://www.facebook.com/JackyardBackoff
Location: Cornwall - UK

Re: I've joined the club

Post by e21-Mark »

Cambridge Motorsport - there service is excellent. I'd suggest the fast road/sprint pads as they work well from cold. I always found EBC yellows etc to be pretty poor in comparison.

http://www.cambridgemotorsport.com/Hawk-Wilwood
problemchild75
E21 Fanatic
Posts: 377
Joined: Fri Jan 27, 2012 2:47 pm
Location: manchester
Contact:

Re: I've joined the club

Post by problemchild75 »

hawk pads are awesome you wont get any better.
Jack25
Newbee
Posts: 15
Joined: Thu Mar 24, 2011 8:39 pm
Location: Gloucestershire

Re: I've joined the club

Post by Jack25 »

Cool. Managed to cancel my order for the yellow stuff. Bank holiday delay was useful :smoke Will order some hawk ones. :thumbsup


Also looking for a rear bumper and nearside trim from rear of the door. If anyone knows anyone breaking an e21 in the south west/midlands area let me know.

Pads ordered. They better come bloody quick for the amount they charged for delivery
Post Reply