BMW E21 327i (second racetrack video)

croma_man · Post by **croma_man** » Tue Jun 10, 2014 11:00 pm

dreams can come true, today I got unpresidented access to the biggest Slovenian international airport for 20 minutes, run&gun photosession. Many other pics following...

Jeroen · Post by **Jeroen** » Wed Jun 11, 2014 12:07 am

That is a dream come true indeed!

croma_man · Post by **croma_man** » Wed Jun 11, 2014 12:33 pm

Peter V. · Post by **Peter V.** » Wed Jun 11, 2014 10:30 pm

Nice pictures!

Jeroen · Post by **Jeroen** » Wed Jun 11, 2014 11:41 pm

Nice location for some pics, and turned out good, too!

croma_man · Post by **croma_man** » Thu Jun 12, 2014 8:07 am

thanks guys! If I could spend here a whole day it wouldn't be enough, so many ideas...

Jeffrey · Post by **Jeffrey** » Fri Jun 13, 2014 12:29 pm

one of best. just your seats looks to new for me

SileNceR · Post by **SileNceR** » Thu Jun 26, 2014 4:02 am

croma_man wrote:
some stiffer springs for the rear, stroker kicks in very hard

How do the stiffer rear springs go? I have the same problem with my E21:

croma_man · Post by **croma_man** » Thu Jun 26, 2014 8:13 am

working all day every day...didn't have time to fit them yet

Jeroen · Post by **Jeroen** » Thu Jun 26, 2014 11:34 pm

Especially the rears aren't much work!

croma_man · Post by **croma_man** » Fri Jun 27, 2014 8:25 am

Jeroen wrote:Especially the rears aren't much work!

next excuse, it's always raining when I get to the workshop, can't drive in the rain

Jeroen · Post by **Jeroen** » Fri Jun 27, 2014 8:32 am

Well let me return then, you don't need a workshop for the rears! Changed them on the street many times: loosen the three top nuts slightly on each side, then jack it up slightly under rear axle or diff. As soon as you see the tension is off the tops you're high enough already, wheels will still be touching the ground. Then you undo the lower bolt, remove the 3 top nuts and the entire package is off the car.

In my younger years changing both of them didn't take more than 15 mins!

SileNceR · Post by **SileNceR** » Sat Jun 28, 2014 1:32 pm

Sounds almost too easy! Pretty well the same on an R33 skyline (and probably other IRS nissans)

Microang · Post by **Microang** » Mon Jun 30, 2014 5:33 pm

I must say this has to be my favourite build on here, such attention to detail!

Is the steering wheel from a e24 and did it require modification to fit?

Also you say you're using an M20B20 block? What is your engine exactly?

Look forward to seeing more...

croma_man · Post by **croma_man** » Mon Jun 30, 2014 9:12 pm

Microang wrote:I must say this has to be my favourite build on here, such attention to detail!

Is the steering wheel from a e24 and did it require modification to fit?

Also you say you're using an M20B20 block? What is your engine exactly?

Look forward to seeing more...

thanks mate !

Steering wheel is from a E30 (with some force, it fitted)

This is a genuine ETA M20B27 with high compression block, crank and pistons, and M20B25 head with a lot of modifications.

bmwe21.net forums

BMW E21 327i (second racetrack video)

Re: BMW E21 327i (Looniticz INC final stroker pics)

Re: BMW E21 327i (Looniticz INC final stroker pics)

Re: BMW E21 327i (Looniticz INC final stroker pics)

Re: BMW E21 327i (Looniticz INC final stroker pics)

Re: BMW E21 327i (Looniticz INC final stroker pics)

Re: BMW E21 327i (Looniticz INC final stroker pics)

Re: BMW E21 327i (Looniticz INC final stroker pics)

Re: BMW E21 327i (Looniticz INC final stroker pics)

Re: BMW E21 327i (Looniticz INC final stroker pics)

Re: BMW E21 327i (Looniticz INC final stroker pics)

Re: BMW E21 327i (Looniticz INC final stroker pics)

Re: BMW E21 327i (Looniticz INC final stroker pics)

Re: BMW E21 327i (Looniticz INC final stroker pics)

Re: BMW E21 327i (Looniticz INC final stroker pics)

Re: BMW E21 327i (Looniticz INC final stroker pics)