Hardeman Motorsport - motorsport parts and diff specialist

Wilwood 4 pot fitting - walkthrough

Post Reply
DEZIAC
Newbee
Posts: 7
Joined: Wed Jun 11, 2008 6:26 am
Location: TORONTO, ON

Re: Wilwood 4 pot fitting - walkthrough

Post by DEZIAC » Tue Aug 14, 2012 6:53 am

nightbear wrote:So, is anyone going to post the brackets blueprint? Would really appreciate that!
Yes...Is anyone willing to share the CAD file for the brackets?



nightbear
Newbee
Posts: 12
Joined: Thu Mar 17, 2011 10:56 pm

Re: Wilwood 4 pot fitting - walkthrough

Post by nightbear » Fri Nov 16, 2012 10:49 am

what a community.

I dont mind sharing any knowledge I have of my car. I have a t3/t4 fitted m10b20 MS2 '81 street maniac monster, so any questions welcome.

really thought that it is not that big of a deal to share the blueprint so that we don't have to do the same job twice.

User avatar
Jeroen
Site Admin
Posts: 25513
Joined: Tue Sep 14, 2004 12:23 pm
My E21(s): '81 323i Baur
Location: The Netherlands
Contact:

Re: Wilwood 4 pot fitting - walkthrough

Post by Jeroen » Fri Nov 16, 2012 11:00 am

Agree, but apparently no one has access to it?

More info on your street monster is more than welcome btw, but prolly belongs to the off topic section?
Regards/groeten, Jeroen

We want your contributions in our E21 Facebook Group! Join, like, post & share!

nightbear
Newbee
Posts: 12
Joined: Thu Mar 17, 2011 10:56 pm

Re: Wilwood 4 pot fitting - walkthrough

Post by nightbear » Fri Nov 16, 2012 11:25 am

Don't you have them fitted to your car? Or are you using the volvo upgrade?

User avatar
Jeroen
Site Admin
Posts: 25513
Joined: Tue Sep 14, 2004 12:23 pm
My E21(s): '81 323i Baur
Location: The Netherlands
Contact:

Re: Wilwood 4 pot fitting - walkthrough

Post by Jeroen » Fri Nov 16, 2012 12:32 pm

Yep I have them on my car
Regards/groeten, Jeroen

We want your contributions in our E21 Facebook Group! Join, like, post & share!

nightbear
Newbee
Posts: 12
Joined: Thu Mar 17, 2011 10:56 pm

Re: Wilwood 4 pot fitting - walkthrough

Post by nightbear » Sat Nov 17, 2012 5:17 pm

Is there a chance that you could measure them up?

User avatar
Jeroen
Site Admin
Posts: 25513
Joined: Tue Sep 14, 2004 12:23 pm
My E21(s): '81 323i Baur
Location: The Netherlands
Contact:

Re: Wilwood 4 pot fitting - walkthrough

Post by Jeroen » Sat Nov 17, 2012 5:22 pm

Can't do a decent job without taking it all apart which I'm not prepared to do if you don't mind. Better keep watching this place, the brackets do pop up every now and then.
Regards/groeten, Jeroen

We want your contributions in our E21 Facebook Group! Join, like, post & share!

nightbear
Newbee
Posts: 12
Joined: Thu Mar 17, 2011 10:56 pm

Re: Wilwood 4 pot fitting - walkthrough

Post by nightbear » Sun Nov 18, 2012 11:45 am

ok no prob
where did you get them?
at some point I read somewhere here that someone is making them for quite a reasonable price, was it?

User avatar
Jeroen
Site Admin
Posts: 25513
Joined: Tue Sep 14, 2004 12:23 pm
My E21(s): '81 323i Baur
Location: The Netherlands
Contact:

Re: Wilwood 4 pot fitting - walkthrough

Post by Jeroen » Sun Nov 18, 2012 12:27 pm

Believe Jason had them made, I had them remade by a local business in an even better quality and I'm trying to get him to make some more but he's not willing to share any info about them.
Regards/groeten, Jeroen

We want your contributions in our E21 Facebook Group! Join, like, post & share!

nightbear
Newbee
Posts: 12
Joined: Thu Mar 17, 2011 10:56 pm

Re: Wilwood 4 pot fitting - walkthrough

Post by nightbear » Sun Nov 18, 2012 8:09 pm

tja spytig
but i'll manage ;)

nightbear
Newbee
Posts: 12
Joined: Thu Mar 17, 2011 10:56 pm

Re: Wilwood 4 pot fitting - walkthrough

Post by nightbear » Wed Feb 06, 2013 12:05 pm

still no chance?
can you try to order a pair made?
I am even willing to drop by to pick them up

User avatar
e21-Mark
E21 Master
Posts: 5716
Joined: Fri Mar 21, 2008 2:19 pm
My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
Facebook page: https://www.facebook.com/JackyardBackoff
Location: Cornwall - UK

Re: Wilwood 4 pot fitting - walkthrough

Post by e21-Mark » Wed Feb 06, 2013 2:11 pm

Ideally you just need a pair to copy or the CAD drawing. They're basic enough but measurements need to be accurate obviously.

nightbear
Newbee
Posts: 12
Joined: Thu Mar 17, 2011 10:56 pm

Re: Wilwood 4 pot fitting - walkthrough

Post by nightbear » Thu Mar 07, 2013 6:48 pm

problem is - noone wants to measure them. which is quite simple and a great thing for the community.
the profit that you can make off of making them is going to barely cover your pair, so it's not really worth to hide it, have no idea why noone signed up for this.
in our community you would get thrown cakes at for that. and no sweet ones, be sure of that.

User avatar
nas80
E21 Mad
Posts: 2974
Joined: Sun Jun 14, 2009 12:12 am
Location: West Yorkshire

Re: Wilwood 4 pot fitting - walkthrough

Post by nas80 » Sat Mar 23, 2013 1:24 am

its not that mate.. people bought them and then stuck them on the car and it means that you cant get a chance to measure them? nothing to do with price, when we got them they were v.cheap.
[img]http://s13.photobucket.com/albums/a285/nasbucket/forumsig.jpg[/img]

Jacko
E21 Fanatic
Posts: 202
Joined: Mon Oct 19, 2009 12:08 pm
Location: Rossendale

Re: Wilwood 4 pot fitting - walkthrough

Post by Jacko » Tue Mar 26, 2013 1:32 am

If anyone has a bracket I can get cads done. I have cads for the front and rear brake setup on my e21 and I've passed them to a few engineers for pricing but they are only suitable for 300mm disks and not standard e21 323 disks.
1986 E28 M535i - Car stripped to shell ready to be blasted
1981 E21 323i - 2.8 24v on throttle bodies & cams - 3.0 conversion soon.

[img]http://i3.photobucket.com/albums/y99/Arnold_the_swimmer/My%20M535i/IMG_0447sig-1.jpg[/img]

Post Reply