BMW 315 550hp "black smoke"
-
- Upcoming E21 fanatic
- Posts: 43
- Joined: Tue Mar 03, 2009 3:51 am
- Location: Albuquerque, New Mexico, USA
- Contact:
Re: BMW 315 550hp "black smoke"
you guys wanna see a turbo diesel setup from the states?? this is a triple turbo dodge cummins truck thats daily driven and has 1200hp. 1450 lb-ft torque.
http://www.dieselpowermag.com/tech/dodg ... to_02.html
http://www.dieselpowermag.com/tech/dodg ... to_02.html
Re: BMW 315 550hp "black smoke"
Here is one fast Dura from Finland http://www.youtube.com/watch?v=tkl6v5Cd ... re=relatedamerican 320i wrote:you guys wanna see a turbo diesel setup from the states?? this is a triple turbo dodge cummins truck thats daily driven and has 1200hp. 1450 lb-ft torque.
http://www.dieselpowermag.com/tech/dodg ... to_02.html
And only two turbos
And back to topics car,
I test fit welded parts and they fit perfect. Thinking paint all black (structur) paint.
Bmw e21 2.5 20v
Bmw 325ix touring
Bmw 325ix touring
Re: BMW 315 550hp "black smoke"
Have to cut whole kardan tunnell of, that Mersedes tranny dont fit there.
Corners inside is good shape, so little rust.
New Davies water pump arrived also.
Corners inside is good shape, so little rust.
New Davies water pump arrived also.
Bmw e21 2.5 20v
Bmw 325ix touring
Bmw 325ix touring
Re: BMW 315 550hp "black smoke"
full of win
Re: BMW 315 550hp "black smoke"
Little space the valves
Firs have to do tool that keep piston staight.
Next sharp edges smooth and new coatings .
And some Concrete on the block.
Firs have to do tool that keep piston staight.
Next sharp edges smooth and new coatings .
And some Concrete on the block.
Bmw e21 2.5 20v
Bmw 325ix touring
Bmw 325ix touring
Re: BMW 315 550hp "black smoke"
jeemu wrote:Little space the valves
And some Concrete on the block.
Concrete?
Re: BMW 315 550hp "black smoke"
Yesac/dennis wrote:jeemu wrote:Little space the valves
And some Concrete on the block.
Concrete?
Bmw e21 2.5 20v
Bmw 325ix touring
Bmw 325ix touring
-
- E21 starter
- Posts: 20
- Joined: Sat Feb 05, 2011 11:45 pm
Re: BMW 315 550hp "black smoke"
Some serious building..
Re: BMW 315 550hp "black smoke"
Hi,jeemu wrote:Yesac/dennis wrote:jeemu wrote:Little space the valves
And some Concrete on the block.
Concrete?
Why do you put concrete in the block?
Re: BMW 315 550hp "black smoke"
Not install Wilwoods this summer, so is there some good calipers that fit those 323i strut and e12 hub?
Maybe around 280-300mm disk.
Maybe around 280-300mm disk.
Bmw e21 2.5 20v
Bmw 325ix touring
Bmw 325ix touring
Re: BMW 315 550hp "black smoke"
Almost bolt on 4 piston caliper and 280x25 diskjeemu wrote:Not install Wilwoods this summer, so is there some good calipers that fit those 323i strut and e12 hub?
Maybe around 280-300mm disk.
Bmw e21 2.5 20v
Bmw 325ix touring
Bmw 325ix touring
Re: BMW 315 550hp "black smoke"
so back to the concrete..... it just guna crack up (as the block expands and contracts with heat. not to mention viabrations thru the block esp. in a diesel) and come loose?. bits of concrete swimming round in the coolant. does that make the water pump run better?
Jeroen wrote:Bmwe21.net, for all your insurance solutions
Re: BMW 315 550hp "black smoke"
Its not the same type of concrete you use for house foundations Murranmurran wrote:so back to the concrete..... it just guna crack up (as the block expands and contracts with heat. not to mention viabrations thru the block esp. in a diesel) and come loose?. bits of concrete swimming round in the coolant. does that make the water pump run better?
I believe its special stuff for engine blocks - its a tried and tested way of adding strength to the block. Another way is passing a rod that bolts each external face of the block together to stop it expanding too much. (Much like they use on old houses where the walls have bowed out) if that makes sense.
1986 E28 M535i - Car stripped to shell ready to be blasted
1981 E21 323i - 2.8 24v on throttle bodies & cams - 3.0 conversion soon.
[img]http://i3.photobucket.com/albums/y99/Arnold_the_swimmer/My%20M535i/IMG_0447sig-1.jpg[/img]
1981 E21 323i - 2.8 24v on throttle bodies & cams - 3.0 conversion soon.
[img]http://i3.photobucket.com/albums/y99/Arnold_the_swimmer/My%20M535i/IMG_0447sig-1.jpg[/img]