my project is underway- new pics 12/22
- tyson 320i/323i
- Upcoming E21 fanatic
- Posts: 109
- Joined: Wed Jun 02, 2010 12:26 am
- Location: in the states
Re: my project is underway- new pics 8/28
maybe we could start another post- what do you do for work. when i tell most people what i do they ask what and i have to explain it in very simple terms
- Peter V.
- E21 VIP
- Posts: 12000
- Joined: Sun Mar 30, 2008 12:42 pm
- My E21(s): '82 320/6
- Location: Breda, Nederland
Re: my project is underway- new pics 8/28
I do not know if everybody wants to tell where they work but i know that there are many differences between the E21 owners.
I am not sure but i think there is such a topic somewhere.
I am not sure but i think there is such a topic somewhere.
Gr Peter V.
.Some say he eats nuts and bolts for breakfast, all we know is he is called the carburetorman.
BMW E21, 1981 320/6 Ascot Grau.
BMW E85, 2004 Z4 2.5i Sterling Grau.
BMW F31, 2017 320dA EDE Luxuryline Mineral Grau.
.Some say he eats nuts and bolts for breakfast, all we know is he is called the carburetorman.
BMW E21, 1981 320/6 Ascot Grau.
BMW E85, 2004 Z4 2.5i Sterling Grau.
BMW F31, 2017 320dA EDE Luxuryline Mineral Grau.
- tyson 320i/323i
- Upcoming E21 fanatic
- Posts: 109
- Joined: Wed Jun 02, 2010 12:26 am
- Location: in the states
Re: my project is underway- new pics 8/28
ok- i was supposed to start working on my car but i got called out to work again. cant fight a paycheck. parts are stacking up so i wont have to wait for things to get here, which is a good thing. having to work on an exhaust system- tons of welding, 20 hours so far.
- tyson 320i/323i
- Upcoming E21 fanatic
- Posts: 109
- Joined: Wed Jun 02, 2010 12:26 am
- Location: in the states
Re: my project is underway- new pics 8/28
heres a pic of the exhaust
- Peter V.
- E21 VIP
- Posts: 12000
- Joined: Sun Mar 30, 2008 12:42 pm
- My E21(s): '82 320/6
- Location: Breda, Nederland
Re: my project is underway- new pics 8/28
That's a big pipe to weld
Is it a gasexhaust or from the coolingsystem?
Indeed you must get the money to get the hobby financed.
Is it a gasexhaust or from the coolingsystem?
Indeed you must get the money to get the hobby financed.
Gr Peter V.
.Some say he eats nuts and bolts for breakfast, all we know is he is called the carburetorman.
BMW E21, 1981 320/6 Ascot Grau.
BMW E85, 2004 Z4 2.5i Sterling Grau.
BMW F31, 2017 320dA EDE Luxuryline Mineral Grau.
.Some say he eats nuts and bolts for breakfast, all we know is he is called the carburetorman.
BMW E21, 1981 320/6 Ascot Grau.
BMW E85, 2004 Z4 2.5i Sterling Grau.
BMW F31, 2017 320dA EDE Luxuryline Mineral Grau.
- tyson 320i/323i
- Upcoming E21 fanatic
- Posts: 109
- Joined: Wed Jun 02, 2010 12:26 am
- Location: in the states
Re: my project is underway- new pics 8/28
peter v- its the gas exhaust. comes right off the backside of the gas turbine. i think the temp in this area will be around 900- 1000 degrees. there is going to be over 1000 linear feet of welding required for this exhaust.
on a car related note- i sent my cam out for a regrind- well actually the missus did it for me
on a car related note- i sent my cam out for a regrind- well actually the missus did it for me
- tyson 320i/323i
- Upcoming E21 fanatic
- Posts: 109
- Joined: Wed Jun 02, 2010 12:26 am
- Location: in the states
Re: my project is underway- new pics 8/28
ok- slight update. have a small window to do some things on the car. finishing the headlight buckets. painted the rims, well at least two of them- sealed the floor plug
sealed floor plug
one bucket finished one waiting
rim before painting
a close up of the same rim
after painting
close up after painting
sealed floor plug
one bucket finished one waiting
rim before painting
a close up of the same rim
after painting
close up after painting
- tyson 320i/323i
- Upcoming E21 fanatic
- Posts: 109
- Joined: Wed Jun 02, 2010 12:26 am
- Location: in the states
Re: my project is underway- new pics 11/9
it seems like its been forever since an update. finally got my cam back from the regrinder. had them put a 284 grind on it. dropped that off at the machine shop. also picked up my block from the machine shop. that thing is sick clean. will post a pic or two of the block after the thanksgiving stuff is over.
- tyson 320i/323i
- Upcoming E21 fanatic
- Posts: 109
- Joined: Wed Jun 02, 2010 12:26 am
- Location: in the states
Re: my project is underway- new pics 11/9
ok- turkey day is over and its almost christmas. jeez, where did the year go. got called out on a another job. finally got some time to post the pics of my block and a little bit of resto work ive been getting done
a shot of the block all clean and shiny
a close up of one of the cylinders
the hood roller that i posted a pic of earlier. i took it down to bare metal and shot it with self etching primer and three coats of epoxy paint
a shot of the block all clean and shiny
a close up of one of the cylinders
the hood roller that i posted a pic of earlier. i took it down to bare metal and shot it with self etching primer and three coats of epoxy paint
- tyson 320i/323i
- Upcoming E21 fanatic
- Posts: 109
- Joined: Wed Jun 02, 2010 12:26 am
- Location: in the states
Re: my project is underway- new pics 12/22
heres a rear shock tower brace/ battery mount ive been working on. need to make the mount for the battery and weld it up. gonna paint it with the epoxy paint too.