my 316 m52 swap
-
- Upcoming E21 fanatic
- Posts: 87
- Joined: Fri Feb 13, 2015 5:18 pm
- My E21(s): '81 316 - '80 320/6
- Location: potters bar
Re: my 316 m52 swap
Thanks fellas my dad has been working he's butt off on this for me with regards to the paintwork ect (Retired panel beater) so I can only take a little credit for it
I made a bit of a cock up with regards to the powder coating bits - they were supposed to be satin and come back gloss (brake assembly, scuttle panel & anti roll bar) but decided I quite like it so did the servo and master cylinder to match . Brake pipes and clutch pipes to be made tomorrow, refit the wings and front panel & bumper then I can start thinking about fitting the engine- although this will now have to match the cleanliness of everything else that's been done. This just chuck an m52 in has gone a bit far but hopefully worth it in the long run lol
I made a bit of a cock up with regards to the powder coating bits - they were supposed to be satin and come back gloss (brake assembly, scuttle panel & anti roll bar) but decided I quite like it so did the servo and master cylinder to match . Brake pipes and clutch pipes to be made tomorrow, refit the wings and front panel & bumper then I can start thinking about fitting the engine- although this will now have to match the cleanliness of everything else that's been done. This just chuck an m52 in has gone a bit far but hopefully worth it in the long run lol
-
- Upcoming E21 fanatic
- Posts: 87
- Joined: Fri Feb 13, 2015 5:18 pm
- My E21(s): '81 316 - '80 320/6
- Location: potters bar
Re: my 316 m52 swap
Bit of a slow progress day today, but it nearly has its pretty face back
-
- Upcoming E21 fanatic
- Posts: 87
- Joined: Fri Feb 13, 2015 5:18 pm
- My E21(s): '81 316 - '80 320/6
- Location: potters bar
-
- Upcoming E21 fanatic
- Posts: 87
- Joined: Fri Feb 13, 2015 5:18 pm
- My E21(s): '81 316 - '80 320/6
- Location: potters bar
Re: my 316 m52 swap
So today we got most of the brake pipes made, and fitted up the the grill
-
- Upcoming E21 fanatic
- Posts: 87
- Joined: Fri Feb 13, 2015 5:18 pm
- My E21(s): '81 316 - '80 320/6
- Location: potters bar
Re: my 316 m52 swap
Before
After
After
Last edited by Gavin Martin on Sat Feb 18, 2017 6:32 pm, edited 2 times in total.
-
- Upcoming E21 fanatic
- Posts: 87
- Joined: Fri Feb 13, 2015 5:18 pm
- My E21(s): '81 316 - '80 320/6
- Location: potters bar
-
- Upcoming E21 fanatic
- Posts: 87
- Joined: Fri Feb 13, 2015 5:18 pm
- My E21(s): '81 316 - '80 320/6
- Location: potters bar
Re: my 316 m52 swap
Some nice new shiny bits arrived today i purchased these from tengu drift on Facebook, they were able to get the spring rates I wanted and they were about £80 cheaper than anywhere else I looked - highly recommended them and their services
-
- Upcoming E21 fanatic
- Posts: 87
- Joined: Fri Feb 13, 2015 5:18 pm
- My E21(s): '81 316 - '80 320/6
- Location: potters bar
Re: my 316 m52 swap
Got a few more bits back from the powder coaters so managed to get the rack cleaned and put back together with new rubbers. Just waiting for new gaitors to arrive and that's another job ticked off the list
-
- E21 starter
- Posts: 39
- Joined: Fri Feb 06, 2015 11:00 pm
- My E21(s): ´79 Euro 320/6 5speed Manual
Re: my 316 m52 swap
did you get poly bushes for the steering rack?
that is clean like hell!!! i´m also doing a m52b28 swap in my 1979 320/6, but i´m in the process of get all the bits!
wish mine will look like that! great work
that is clean like hell!!! i´m also doing a m52b28 swap in my 1979 320/6, but i´m in the process of get all the bits!
wish mine will look like that! great work
-
- Upcoming E21 fanatic
- Posts: 87
- Joined: Fri Feb 13, 2015 5:18 pm
- My E21(s): '81 316 - '80 320/6
- Location: potters bar
Re: my 316 m52 swap
Thank you - it's starting to come together now I've gone for standard ones for now, but will upgrade to poly later in the year - I'm going to put a quick rack in as soon as funds allow.
Have you already started your swap?
Have you already started your swap?
-
- E21 starter
- Posts: 39
- Joined: Fri Feb 06, 2015 11:00 pm
- My E21(s): ´79 Euro 320/6 5speed Manual
Re: my 316 m52 swap
Nop, i´m after all the pieces, like the m50b25 sump and intake and the engine it self, lool... Where are you going to get the quick rack, and how much did it cost?
Did you fabricate the engine mounts? My mechanic says that m30b35 e28 engine mounts should fit without major mods...
Did you fabricate the engine mounts? My mechanic says that m30b35 e28 engine mounts should fit without major mods...
-
- Upcoming E21 fanatic
- Posts: 87
- Joined: Fri Feb 13, 2015 5:18 pm
- My E21(s): '81 316 - '80 320/6
- Location: potters bar
Re: my 316 m52 swap
Sourcing the parts took me a while too, the steering rack has not been purchased yet and I'm not sure on the cost but there is a company in the UK that does them apparently. Soon as funds allow I will investigate further. As for the engine mounts I have used the alloy mounts from the m20 with standard (new) m20 rubber mounts, the engine will be going in very soon so will be able to report on the success of this set up