bmwe21.net forums

niall

As you all know i have poly bushes in my e21, i got them made by a local company and i am prepared to get a run of them made but i need at least 10 orders worldwide.

Previously i got the stabiliser bar "D" bushes and the stabiliser to lower control arm bushes made. i didnt bother with the inner control to subframe bushe because of the design it would have involved alot of modification.

So anybody who wants a set of D bushes and stabiliser to control bushes, put your name down here. Price will be around $50 Australian + postage to your part of the world.

-----------------------

Almost any bush made in rubber can be made in polyeurethane. if you have something in particular you would like made then let me know. I was thinking of getting the steering shaft flexible rubber disk made and maybe engine mounts.

But lets take one step at a time.

Post here for the front bushes
_________________
Niall Phillips------The bmw traitor
Project e21 RB20
Project Mk1 G60
Project Suzuki
Project Zed
www.motorswaps.net

ronaldo · Posted: Sat Nov 10, 2007 9:48 am Post subject:

Do you have some good example pic's from those under your care so I know what exactly bushes you mean?

niall · Posted: Sat Nov 10, 2007 1:44 pm Post subject:

Ok. i will get pics tomoro
_________________
Niall Phillips------The bmw traitor
Project e21 RB20
Project Mk1 G60
Project Suzuki
Project Zed
www.motorswaps.net

niall · Posted: Fri Nov 16, 2007 7:28 am Post subject:

got 2 possible orders so far, any more?

Here are the pics as requested.

The yellow bar is the stabiliser bar. The big red bushes i call the lower control arm /stabiliser bar bushes. they are a 2 peice bush and require no special tools to install . the old bmw bushes will need to be removed in a press/vice or i can tell you how to cut them out, if you do not have access to that equipment

The other bushes in the clamp are the stabiliser "D" bushes. they require no special tools to install.

The kit comes with 6 bushes in total. which is what is required for one vehicle. included in the kit is 2 big washers for the lower control bushes and some assembly grease.

Price is 60 dollars AUS plus postage to your part of the world , thats i f i have less than 10 orders initially

over 10 orders price is 55 dollars plus postage.

I will offer a 1 year warranty against pre-mature failure due to manufacturing fault.

Personally i have had my bushes installed since 2005 with no problems.
_________________
Niall Phillips------The bmw traitor
Project e21 RB20
Project Mk1 G60
Project Suzuki
Project Zed
www.motorswaps.net

niall · Posted: Fri Nov 16, 2007 3:05 pm Post subject:

another 2 possibles. up to 4 so far
_________________
Niall Phillips------The bmw traitor
Project e21 RB20
Project Mk1 G60
Project Suzuki
Project Zed
www.motorswaps.net

mbuus · Posted: Fri Nov 16, 2007 11:23 pm Post subject:

Yo man slap me one of those bad boys! for $55-60 thats a bargain ill take one for sure
_________________
some would call me
Marko?
---
Porsche 944S red YEAH
E30 '85 325i baur alpine white
E21 is off the road atm Sad

niall · Posted: Sat Nov 17, 2007 3:55 am Post subject:

cheers marko.

thats 5
_________________
Niall Phillips------The bmw traitor
Project e21 RB20
Project Mk1 G60
Project Suzuki
Project Zed
www.motorswaps.net

superj · Posted: Sat Nov 17, 2007 3:42 pm Post subject:

when you put those in, did it help with that wheel shake at 55 mph?
_________________

this could be great tattoo

niall · Posted: Sun Nov 18, 2007 12:55 am Post subject:

Worn out lower control bushes can do that.

Mine werent too bad when i removed them so its hard to say, put it this way idont have any shimmy or shake at any speeds or during braking
_________________
Niall Phillips------The bmw traitor
Project e21 RB20
Project Mk1 G60
Project Suzuki
Project Zed
www.motorswaps.net

superj · Posted: Sun Nov 18, 2007 3:20 am Post subject:

so the price is whatever plus shipping to where ever in the world? how long till your mailing them out and when do you want some money in your account? put me on the list also
_________________

this could be great tattoo

superj · Posted: Sun Nov 18, 2007 3:22 am Post subject:

oh yes, shipping to 78418 for me as soon as you have them available
_________________

this could be great tattoo

niall · Posted: Sun Nov 18, 2007 5:35 am Post subject:

thanks superj

that makes 6 so far.

I have been told manufacture will take 3 weeks from date of order
_________________
Niall Phillips------The bmw traitor
Project e21 RB20
Project Mk1 G60
Project Suzuki
Project Zed
www.motorswaps.net

tonberry · Posted: Sun Nov 18, 2007 11:23 am Post subject:

i'll be down for 3 kits niall Laughing

VerDi · Posted: Mon Nov 19, 2007 8:37 am Post subject:

Hello niall,

I have a set superpro bushes ready for my car but I see you have some bushings that are not in the kit. The bushes I don't have are those on the second picture.. Can you sell me only these or do I have to take a complete set?
THx!
_________________
There's no such thing as overpowered...
http://shop.kapaza.be/VerDi/

niall · Posted: Mon Nov 19, 2007 9:02 am Post subject:

hey tonberry do u seriously want 3 sets?

And verdi, i can send u the 2 "D" bushes for $20 AU plus postage

Unfortunately i cannot give postage costs untill the items are made because i do not know the weight of the kit.

As a ball park figure, 10AU anywhere in AUS, and 25 to 30AU worldwide.

Discounts available for multiple orders. but as i said i cannot quote untill items are made
_________________
Niall Phillips------The bmw traitor
Project e21 RB20
Project Mk1 G60
Project Suzuki
Project Zed
www.motorswaps.net