4-way flasher

[engrrick]

I ordered a 4-way flasher from FCPEuro, according to the REALOEM.COM site's part number. However, the part was not correct. The unit I have has many prongs in the back, whereas the indicated unit has only three. I have included pictures to see if anyone can identify the unit that was in my car. This unit would not stay in the "in" or "off" position which is why I need a new one. Thanks to anyone who can ID this.

I cannot seem to be able to upload the pictures, so until I figure that out, the number on the front of the flasher, around the red push button is SAE Q74 DKS-G. There are 7 connectors on the back, and a resister across two of them.

[Manitoba]

Hi Rick,

The pics you mention seem to be missing. There's an easy DIY fix it guide, step-by-step somewhere on the forum here. I am a true no know on technical issues, but even I succeeded in fixing this switch (I suppose it's the hazard switch you're talking about?).

Good luck,

Greetz,
Walter.

[Jeroen]

For posting pics, right at the top of the General section there are instructions mate, don't know where else to put them to prevent them from being overlooked.

Direct link: Howto: posting photos and movies