My E21 M30B35 project
-
super_drift_ledgend
- Newbee
- Posts: 10
- Joined: Thu Feb 12, 2009 2:02 am
- DrGonzoPOW
- E21 Pro
- Posts: 990
- Joined: Sat May 31, 2008 4:44 pm
- Location: West Yorkshire
- DrGonzoPOW
- E21 Pro
- Posts: 990
- Joined: Sat May 31, 2008 4:44 pm
- Location: West Yorkshire
- --ALPINA--
- E21 Pro
- Posts: 1014
- Joined: Wed May 17, 2006 1:29 am
- Contact:
did you get the front shocks nut? cos when you get to fit the front inserts you will need the nut to lock it in place and if you aint got that then be prepared to fork out £30 squid each for them!! probably its why you get em cheap, they normally come with the kit when boxed!! you will need the bilstein nut locks cos the diameter of the telescopic end, the e21 is thinner!!
hope this helps otherwise dont wanna spoil your mood for getting them cheap... without the complete kit!!!
As a rough example the link below shows the shox with the ring nut needed, without that dont bother to fit em and make sure you get the correct size!!
http://www1.carparts-cat.com/webkat.asp ... 004&ROOT=1
j
hope this helps otherwise dont wanna spoil your mood for getting them cheap... without the complete kit!!!
As a rough example the link below shows the shox with the ring nut needed, without that dont bother to fit em and make sure you get the correct size!!
http://www1.carparts-cat.com/webkat.asp ... 004&ROOT=1
j
(- (- (- ---- Project 911 on the hunt ----) -) -)
- --ALPINA--
- E21 Pro
- Posts: 1014
- Joined: Wed May 17, 2006 1:29 am
- Contact:
- DrGonzoPOW
- E21 Pro
- Posts: 990
- Joined: Sat May 31, 2008 4:44 pm
- Location: West Yorkshire
New BBS RM dishes arrived today!!
Hi Guys, thought I would share this with you.
Fully refurbed barrels, polished bolts, not chrome, brand new dishes 2" and 3" so fronts are 8 " x 15" and rears will be 9" x 15".
Comments welcome.

Fully refurbed barrels, polished bolts, not chrome, brand new dishes 2" and 3" so fronts are 8 " x 15" and rears will be 9" x 15".
Comments welcome.




