bmwe21.net forums

Posted: **Thu Dec 04, 2014 3:26 pm**

E21noob wrote:From what I can understand I had a similar problem when I installed my DVAG 32/36.

I first put a universal linkage kit on, but it was like you descibe abrubt and sudden. http://www.dellorto.co.uk/merchandise/p ... ctionID=49

I then installed a larger wheel which made it much smoother and gave a little longer travel. http://www.dellorto.co.uk/merchandise/p ... ctionID=49

Also had to adjust the stop under the pedal.

Ah I see - that's very helpful, thank you. That's the part I was trying to explain earlier, I think I'll email the supplier (Webcon) to find out if they can recommend a replacement / improved throttle wheel for my unit....

Re the pedal stop.... did you lower/shorten it then?

Posted: **Thu Dec 04, 2014 3:52 pm**

You are welcome

First I removed it, but in the end I actually had lengthen it sligthly. I just user some threaded M8 (or M10?) steel rod.

When I said longer travel, I was comparing to the universal kit which had very short travel.

Posted: **Thu Dec 04, 2014 5:20 pm**

I see.

When I bought the Weber carb kit it wasn't supplied with a new accelerator wheel, I had to utilise the original bmw one.

bmwe21.net forums

Stiff throttle after Weber upgrade

Re: Stiff throttle after Weber upgrade

Re: Stiff throttle after Weber upgrade

Re: Stiff throttle after Weber upgrade