Page 2 of 2

Re: Suspension

Posted: Fri Mar 13, 2015 9:35 am
by jimbob
With lowering the car 205 50 15s might not work on the front

Re: Suspension

Posted: Fri Mar 13, 2015 9:40 am
by Thedhj
E21noob wrote:Yeah I agree. Springs are wrong and there isn't enough profile on the tyres for 15s. Nice wheels though!
Thanks they were imported from Australia so I think there pretty rare. I just need to get the rims polished.
I'm basically trying to get all the mechanical stuff sorted before it gets painted. Thanks for the advice and your time guys.

Re: Suspension

Posted: Fri Mar 13, 2015 9:46 am
by Thedhj
jimbob wrote:With lowering the car 205 50 15s might not work on the front
It's lowered 40 already and the front is much higher than the rear!

Re: Suspension

Posted: Fri Mar 13, 2015 11:02 am
by jimbob
With -40mm springs and 15" wheels 205 50 tyres rubbed on full lock on my 323.
It will depend on the offset of your wheels too.
and as you said your springs dont produce the the amount of lowering you require
so going any lower u may encounter clearance issues at the front
195 50 was ok on the front and didnt rub at all

Re: Suspension

Posted: Fri Mar 13, 2015 1:33 pm
by Thedhj
jimbob wrote:With -40mm springs and 15" wheels 205 50 tyres rubbed on full lock on my 323.
It will depend on the offset of your wheels too.
and as you said your springs dont produce the the amount of lowering you require
so going any lower u may encounter clearance issues at the front
195 50 was ok on the front and didnt rub at all
Ok great, thanks, did you just use 40mm springs and did it have a nice stance?

Re: Suspension

Posted: Fri Mar 13, 2015 2:05 pm
by jimbob
I used apex -40mm springs, standard shocks to begin with then uprated bilsteins.
it sat just right for me not too low and a comfortable ride
Image

Re: Suspension

Posted: Fri Mar 13, 2015 2:16 pm
by Thedhj
Yeah that looks great, I can't work out why mine is sitting so high. I guess I'll buy some new springs and go from there.
Cheers

Re: Suspension

Posted: Fri Mar 13, 2015 2:22 pm
by jimbob
No problem i hope you get it sorted

Re: Suspension

Posted: Fri Mar 13, 2015 8:12 pm
by nuke laars
jimbob wrote:I used apex -40mm springs, standard shocks to begin with then uprated bilsteins.
it sat just right for me not too low and a comfortable ride
Image
That looks like a perfect usable drop to me. Nice car!

Re: Suspension

Posted: Fri Mar 13, 2015 8:16 pm
by nuke laars
Thedhj wrote:Tyres 195 45 15, but looking at the forum people are using 205 50 15 I belive.
I bought the springs on eBay and it said they were compatible with 315-323i.

How did you get the photos to open on the page. (Thanks for that)
In your photobucket gallery, use the IMG tag in the list of options, you only need to click it and it will copy. Then just paste into your post. HTH

Re: Suspension

Posted: Fri Mar 13, 2015 8:23 pm
by Jeroen