bmwe21.net forums

Posted: **Wed Nov 04, 2009 9:19 pm**

As earlier said - pls make a sticky!

Posted: **Wed Nov 04, 2009 9:50 pm**

Jimi: thanks, if the mounts on the calipers are in about the same position that's true.

323baur: yes boss!

Posted: **Wed Nov 04, 2009 10:14 pm**

Posted: **Wed Nov 04, 2009 11:04 pm**

Jeroen wrote:Jimi: thanks

No worried hope youget the same type of pipe work as they are the best i reckon and the way to go..

J

Posted: **Thu Nov 05, 2009 5:41 pm**

Obviously you are usung vented discs, 22mm?

The Powerlite accepts disc diameters from 240mm to 285mm and 2 disc thickness, solid (9-13mm) or vented (20-22mm). Piston diameters 1.00", 1.25" or 1.38.''

Part Numbers For Ordering:

Part Number-------Bore Size-----------Disc Width
120-8729---------1.38" 35.1mm-------.79"-.86" vented
120-8726---------1.38" 35.1mm-------.35"-.50" solid
120-8728---------1.25" 31.8mm-------.79"-.86" vented
120-8725---------1.25" 31.8mm-------.35"-.50" solid
120-8727---------1.00" 25.4mm-------.79"-.86" vented
120-8724---------1.00" 25.4mm-------.35"-.50" solid

There are a few options of powerlite calipers, which ones have you all gone for?

Posted: **Mon Nov 09, 2009 6:04 pm**

Using standard vented discs with the wilwoods and pads fitted is a tight fitting and the disc just about spins freely....

J

Posted: **Mon Nov 16, 2009 10:52 am**

guys please help asap, what is the standard size of the female end of the braided hose i need,
i have converted the willwood using the adaptor so its now male bmw thread but gonna get some pipes made which are double the length of the standard rubber pipes.

rally design will make them for me cheapy cheap, i just dont know the fitting

Posted: **Wed Nov 18, 2009 5:16 pm**

rally design have sent me the hoses

cost £10 each plus the silly amount of posting of £9.50, cheaper if buy bulk in future.

gonna get some heat shrink later and cover up the hose to stop tarnishing.

made to order and almost next day delivery

Posted: **Fri Nov 20, 2009 9:48 am**

My car is still at the back of a yard 40 miles away. Anyone mind sharing sizes for hoses?T

Posted: **Fri Nov 20, 2009 11:18 am**

call rally design, you need 2 brake hoses 60cm long with m10 x 1 female fittings and then 2 x willwood to metric adaptors, (male imperial end screws in the willy and male m10 x 1 for the pipe.) jobs a good un! should cost you about £35 inc vat and postage, postage is silly so bulk together n get em cheaper

Posted: **Tue Dec 01, 2009 5:23 pm**

Thank you very much, will get them ordered up shortly. T

Posted: **Mon Jan 04, 2010 9:15 pm**

Plenty of clearance under 13" rims

Also no extra pedal play for me after careful bleeding of the rear brakes.

Ben

Posted: **Tue Jan 05, 2010 10:16 am**

ben get your bum round mine with a brake bleeder then and help me with zans lol

Posted: **Tue Jan 05, 2010 1:57 pm**

austin25uk wrote:ben get your bum round mine with a brake bleeder then and help me with zans lol

Can't do tonight, what about wednesday?

I can give you the brembos then as well

Ben

Posted: **Tue Jan 05, 2010 2:07 pm**

errrrr im free wednesday or all sat afternoon and sunday. which ever is easiest for you dude. need a hand getting his bonnet off aswell so i can get to the front to do the cambelt without doing my back in. just gimme a txt

bmwe21.net forums

Wilwood 4 pot fitting - walkthrough