bmwe21.net forums

square head lights are sooooo wrong.
the reason the tyre popped off is nothing to do with suspention bushes. the bead simply cant seat correctly. any side loading on the tyre and it rolls the bead over and adious muchatchous.

Silver Surfer wrote:Tommi, here's the snaps I took yesterday..



Tyre adventures:



Seeing as you're never gonna take any photo's I took it upon myself!!!

Looking very cool

sideskirts next????

refit tyre next lol,
just ordered my rear coilovers so i can get her a little lower in the ass now with out rubbing. gonna pick up poly bush stuff on sat so i can make those on sunday when im bored or doing Zans car.
should be back on the road by monday, although i will prob damage myself by drifting or sumin just as silly! been waiting for a stiff rear end for some time (dont even think about using that as a dirty comment)!!!!

finally got tyre refitted.

reason tyre came off was a tiny bit of weld left on the rear arch was poking down,
the rear left spring is shot and everytime i pull away it drags down on the arch. coilovers arrive tomorrow which is all good,
gonna fit them on and then i can take her for a proper spin

got a couple of pics of the car in the local tyre place

car will be cleaned on wednesday and my jager stickers will be applied to the car, then she is having a road trip to somerset to go to fritz for a make over i thinks.



nice arse, you can see where i switched matt black paint brands lol



one day i will actually get some time off work so i can take some decent photo's of the car,
maybe even wednesday

Are you respraying the bottom half to match the top, so it looks like a Jager race car?

she will be going fully orange when i can afford to get some body else to do the bodywork, im useless at doing bodywork!
that or if anyone has any other crazy paint ideas

Speaking of jäger, I know you'll appreciate this as much as we did David...when we picked up mine on saturday, we noticed that the front windscreen has had a jagermeister sticker on it because where it's been taken off, its left the sticky outline of it...classic!
I took it as a sign that it really is meant to be my car, good times!!

well have built my coilovers, now just gotta find a decent drill so i can open up the mounting points to allow for the m6 bilsteins. my tesco value drill just isnt up the job i dont think

PHOTOS!!!!!!!

i have no i phone!!!!!! and no way of taking photos. hannah is always working and i dont trust myself to borrow her nice camera. she is being cleaned today though so be ready for some nice photos later on

she is being cleaned today though so be ready for some nice photos later on

Hannah or the car!!???

ah hah ahha!! pull ya finger out dude

well i fitted the new coilovers and ran into some issues to say the least,

400lb springs are too stiff lol
gonna try 350, also they are too long as the car is about 3 inch's too high, its that or buy the rear kit and remove the circlips

however even though the back end was a little high it felt very very good!
power transfer felt really really good!

right now the other problem

found out why by tyre fell off the other day. the banded steel has a small leak on the band joining bit, so once again the tyre is gonna have to come off. llaaaammmeeeeeeee!!!!!!!!

think gonna leave it now till after crimbo as i cant really afford to buy bits for her.

ah rubbish ... just whack some sealent round it ittl be fine i still need to give you that money too ... what are you doing friday ? im workin at my nans on the kitchen all day but if you arent busy on friday we could get some lunch and ill give you some monies