quinn_656's 323

User avatar
quinn_656
Upcoming E21 fanatic
Posts: 179
Joined: Fri Jan 19, 2007 5:20 pm
Location: N.Ireland
Contact:

Re: quinn_656's 323

Post by quinn_656 »

Been so busy with work recently I'm going to have to make some time over Christmas too push this engine along! I've picked up a few more goodies over the past few weeks though.

Schrick 284 and a fritz manifold quite impressed by the quality of the manifold.

The rs turbo Is something I've had my eye on for a long time which I was given the opportunity to buy will make a cracking wee car someday.

The e46 is a new toy I love these things I work long hours away from home so I'm young and single and need something which I can put the key in and just does what I tell it when I go home for thw weekend haha
Last edited by quinn_656 on Sat Dec 07, 2013 1:09 pm, edited 1 time in total.


My build
http://www.bmwe21.net/forum/viewtopic.php?f=7&t=12052&start=0

www.quinnpiling.com
User avatar
quinn_656
Upcoming E21 fanatic
Posts: 179
Joined: Fri Jan 19, 2007 5:20 pm
Location: N.Ireland
Contact:

Re: quinn_656's 323

Post by quinn_656 »

Image

Image

Image

Image
My build
http://www.bmwe21.net/forum/viewtopic.php?f=7&t=12052&start=0

www.quinnpiling.com
User avatar
Jeroen
Site Admin
Posts: 29194
Joined: Tue Sep 14, 2004 12:23 pm
My E21(s): '81 323i Baur
Location: The Netherlands
Contact:

Re: quinn_656's 323

Post by Jeroen »

All nice developments then, and fun new additions to the stable!

BTW let me move this thread to the modified subsection ok?
Regards/groeten, Jeroen
M15KYY
E21 Fanatic
Posts: 280
Joined: Sun Jun 24, 2007 1:16 pm
Location: west midlands

Re: quinn_656's 323

Post by M15KYY »

good looking car buddy! impressed with the quality of metal work repairs! when you fitted your sills and you had to come up the rear quarter, did you overlap the panels

and fill into them or did you try and flush fit? when I did mine on my gold 316 I found it difficult to mate the sill panels here without warping the panels with the heat of

the welding. on one side I recall trimming most of that part off the sill and using an edge to blend them.

turned out ok in the end though ;)

Image
E21 316 M60
User avatar
quinn_656
Upcoming E21 fanatic
Posts: 179
Joined: Fri Jan 19, 2007 5:20 pm
Location: N.Ireland
Contact:

Re: quinn_656's 323

Post by quinn_656 »

Over a year since i last posted :( but I'm craving some m20 action at the minute. My cylinder head arrived back last week thanks to ric wood for the awesome cnc job ...Christmas holidays sorted

Pics to follow
My build
http://www.bmwe21.net/forum/viewtopic.php?f=7&t=12052&start=0

www.quinnpiling.com
User avatar
quinn_656
Upcoming E21 fanatic
Posts: 179
Joined: Fri Jan 19, 2007 5:20 pm
Location: N.Ireland
Contact:

Re: quinn_656's 323

Post by quinn_656 »

ITB advice also sought after haha
My build
http://www.bmwe21.net/forum/viewtopic.php?f=7&t=12052&start=0

www.quinnpiling.com
User avatar
Jeroen
Site Admin
Posts: 29194
Joined: Tue Sep 14, 2004 12:23 pm
My E21(s): '81 323i Baur
Location: The Netherlands
Contact:

Re: quinn_656's 323

Post by Jeroen »

OK then good luck with that, looking forward to a report on putting things back together...
Regards/groeten, Jeroen
bab-91
Newbee
Posts: 1
Joined: Thu Jul 03, 2014 3:38 am

Re: quinn_656's 323

Post by bab-91 »

:thumbsup

Looking good!
si.
Upcoming E21 fanatic
Posts: 102
Joined: Sat Oct 06, 2012 1:39 pm

Re: quinn_656's 323

Post by si. »

Itb's

http://www.racehead.com.au

Im looking at the same thing and these are the best ive found loads of info on e30tech about them including dyno graphs for comparison

Dependant your time frame we might be able to order 2 sets maybe save a bit on taxes etc if they float your boat
1989 325i touring - eventual track car project - maybe for sale
1973 2002 - joint resto with a mate
1982 316 - m20b25 shitty on the outside shiney on the inside
2005 330i - Clubsport individual
User avatar
quinn_656
Upcoming E21 fanatic
Posts: 179
Joined: Fri Jan 19, 2007 5:20 pm
Location: N.Ireland
Contact:

Re: quinn_656's 323

Post by quinn_656 »

**UPDATE**

Plumbing Wiring Mapping all systems go :D

Image
My build
http://www.bmwe21.net/forum/viewtopic.php?f=7&t=12052&start=0

www.quinnpiling.com
Post Reply