quinn_656's 323
- quinn_656
- Upcoming E21 fanatic
- Posts: 179
- Joined: Fri Jan 19, 2007 5:20 pm
- Location: N.Ireland
- Contact:
Re: quinn_656's 323
Been so busy with work recently I'm going to have to make some time over Christmas too push this engine along! I've picked up a few more goodies over the past few weeks though.
Schrick 284 and a fritz manifold quite impressed by the quality of the manifold.
The rs turbo Is something I've had my eye on for a long time which I was given the opportunity to buy will make a cracking wee car someday.
The e46 is a new toy I love these things I work long hours away from home so I'm young and single and need something which I can put the key in and just does what I tell it when I go home for thw weekend haha
Schrick 284 and a fritz manifold quite impressed by the quality of the manifold.
The rs turbo Is something I've had my eye on for a long time which I was given the opportunity to buy will make a cracking wee car someday.
The e46 is a new toy I love these things I work long hours away from home so I'm young and single and need something which I can put the key in and just does what I tell it when I go home for thw weekend haha
Last edited by quinn_656 on Sat Dec 07, 2013 1:09 pm, edited 1 time in total.
My build
http://www.bmwe21.net/forum/viewtopic.php?f=7&t=12052&start=0
www.quinnpiling.com
http://www.bmwe21.net/forum/viewtopic.php?f=7&t=12052&start=0
www.quinnpiling.com
- quinn_656
- Upcoming E21 fanatic
- Posts: 179
- Joined: Fri Jan 19, 2007 5:20 pm
- Location: N.Ireland
- Contact:
Re: quinn_656's 323
My build
http://www.bmwe21.net/forum/viewtopic.php?f=7&t=12052&start=0
www.quinnpiling.com
http://www.bmwe21.net/forum/viewtopic.php?f=7&t=12052&start=0
www.quinnpiling.com
- Jeroen
- Site Admin
- Posts: 29247
- Joined: Tue Sep 14, 2004 12:23 pm
- My E21(s): '81 323i Baur
- Location: The Netherlands
- Contact:
Re: quinn_656's 323
All nice developments then, and fun new additions to the stable!
BTW let me move this thread to the modified subsection ok?
BTW let me move this thread to the modified subsection ok?
Regards/groeten, Jeroen
Re: quinn_656's 323
good looking car buddy! impressed with the quality of metal work repairs! when you fitted your sills and you had to come up the rear quarter, did you overlap the panels
and fill into them or did you try and flush fit? when I did mine on my gold 316 I found it difficult to mate the sill panels here without warping the panels with the heat of
the welding. on one side I recall trimming most of that part off the sill and using an edge to blend them.
turned out ok in the end though
and fill into them or did you try and flush fit? when I did mine on my gold 316 I found it difficult to mate the sill panels here without warping the panels with the heat of
the welding. on one side I recall trimming most of that part off the sill and using an edge to blend them.
turned out ok in the end though
E21 316 M60
- quinn_656
- Upcoming E21 fanatic
- Posts: 179
- Joined: Fri Jan 19, 2007 5:20 pm
- Location: N.Ireland
- Contact:
Re: quinn_656's 323
Over a year since i last posted but I'm craving some m20 action at the minute. My cylinder head arrived back last week thanks to ric wood for the awesome cnc job ...Christmas holidays sorted
Pics to follow
Pics to follow
My build
http://www.bmwe21.net/forum/viewtopic.php?f=7&t=12052&start=0
www.quinnpiling.com
http://www.bmwe21.net/forum/viewtopic.php?f=7&t=12052&start=0
www.quinnpiling.com
- quinn_656
- Upcoming E21 fanatic
- Posts: 179
- Joined: Fri Jan 19, 2007 5:20 pm
- Location: N.Ireland
- Contact:
Re: quinn_656's 323
ITB advice also sought after haha
My build
http://www.bmwe21.net/forum/viewtopic.php?f=7&t=12052&start=0
www.quinnpiling.com
http://www.bmwe21.net/forum/viewtopic.php?f=7&t=12052&start=0
www.quinnpiling.com
- Jeroen
- Site Admin
- Posts: 29247
- Joined: Tue Sep 14, 2004 12:23 pm
- My E21(s): '81 323i Baur
- Location: The Netherlands
- Contact:
Re: quinn_656's 323
OK then good luck with that, looking forward to a report on putting things back together...
Regards/groeten, Jeroen
Re: quinn_656's 323
Itb's
http://www.racehead.com.au
Im looking at the same thing and these are the best ive found loads of info on e30tech about them including dyno graphs for comparison
Dependant your time frame we might be able to order 2 sets maybe save a bit on taxes etc if they float your boat
http://www.racehead.com.au
Im looking at the same thing and these are the best ive found loads of info on e30tech about them including dyno graphs for comparison
Dependant your time frame we might be able to order 2 sets maybe save a bit on taxes etc if they float your boat
1989 325i touring - eventual track car project - maybe for sale
1973 2002 - joint resto with a mate
1982 316 - m20b25 shitty on the outside shiney on the inside
2005 330i - Clubsport individual
1973 2002 - joint resto with a mate
1982 316 - m20b25 shitty on the outside shiney on the inside
2005 330i - Clubsport individual
- quinn_656
- Upcoming E21 fanatic
- Posts: 179
- Joined: Fri Jan 19, 2007 5:20 pm
- Location: N.Ireland
- Contact:
Re: quinn_656's 323
My build
http://www.bmwe21.net/forum/viewtopic.php?f=7&t=12052&start=0
www.quinnpiling.com
http://www.bmwe21.net/forum/viewtopic.php?f=7&t=12052&start=0
www.quinnpiling.com