Page 1 of 1

valve stem seals

Posted: Fri Oct 08, 2010 9:44 pm
by cdavie2002
How big/easy a job is it to cure the problem of, or replace valve stem seals that leak slightly that cause a bit of a smokey start?

Re: valve stem seals

Posted: Sun Oct 10, 2010 10:51 am
by mattymoo2
my car smokes just on start up and does smell a bit the rest of the time.Its a 320/6 only covering 40000 im hoping its just the valve seals.

Re: valve stem seals

Posted: Mon Oct 11, 2010 4:21 pm
by thetomc
Head off. Plus a bit of fiddling with a valve spring compressor. Its not too difficult if your comfortable with taking the head off. plus, its an ideal oppurtunity to lap your valves in and have a general clean up of the valves and combustion chambers.

Re: valve stem seals

Posted: Tue Oct 12, 2010 5:09 pm
by tommi_e21
also a very good learning experience and allows you to learn lots about the bmw head and how it works

I have a ssetof valve spring compressors if you need to borrow them

Re: valve stem seals

Posted: Thu Oct 14, 2010 2:09 am
by cdavie2002
Thanks guys, im doing my homework on an engine i may buy. Cheers for helpful replies!