Page 1 of 1
fittings on susspension
Posted: Thu Apr 14, 2011 6:01 pm
by raseeda green
Hi, all
Can you tell me if these will fit on a e21 316?
here is a link on sell, cheers
http://cgi.ebay.co.uk/BMW-E21-320-323-3 ... _500wt_940
Re: fittings on susspension
Posted: Thu Apr 14, 2011 6:12 pm
by DrGonzoPOW
You could do with asking the dimensions of them. As far as i know the 323 shocks are larger than the other models. Wizor should hopefully be along shortly!
Re: fittings on susspension
Posted: Thu Apr 14, 2011 6:30 pm
by raseeda green
DrGonzoPOW wrote:You could do with asking the dimensions of them. As far as i know the 323 shocks are larger than the other models. Wizor should hopefully be along shortly!
Q: HELLO HOW MUCH TO AUSTRALIA QLD 4306 AND WHAT DIA ARE FRONT SHOCKS 51 MM? CHEERS PAOLO
A: Hello, dia front shocks are 42mm
found out to be 42mm in dia!"
Re: fittings on susspension
Posted: Thu Apr 14, 2011 6:48 pm
by DrGonzoPOW
Mmmm, if there the smaller diameter they should fit
Re: fittings on susspension
Posted: Thu Apr 14, 2011 6:59 pm
by rob0r
It's a very bad advert! 320 and 316 are interchangeable since they use the small struts. 323i use the bigger struts. As Gonzo says you should be ok, 42mm should be the smaller shock size
Re: fittings on susspension
Posted: Thu Apr 14, 2011 7:04 pm
by DrGonzoPOW
Ah, here's the man now
Re: fittings on susspension
Posted: Thu Apr 14, 2011 7:19 pm
by raseeda green
Many Thanks, wizor and the DR
for the right price, my car will look good this summer...
cheers
Re: fittings on susspension
Posted: Thu Apr 14, 2011 7:24 pm
by DrGonzoPOW
Well dont spend over £350 on it!! You can get a good Spax kit for that
Re: fittings on susspension
Posted: Thu Apr 14, 2011 7:56 pm
by raseeda green
Cheers, Im try not to, as have too many other parts to get for her,
I did here the that billy were the best for the job but they are pricey, I hope these should be allright as i use her for casual driving and not for track.