Page 1 of 1
Removing Baur pillar covers
Posted: Thu May 05, 2011 2:04 pm
by keitht
Help...how do I get these off...do I have to remove the rear quarter lights /??
Or do they just pull off from under the rubber seals...( with some effort ) ?
Cheers Keith
Re: Removing Baur pillar covers
Posted: Thu May 05, 2011 6:44 pm
by drjim
remove quarter lights, remove all the old sealant, undo the little phillips head screws that hold them on then prise away from the sealant underneath them.
Baur name badges pop off, but very easy to snap one of the prongs off.
I'll be reassembling mine tomorrow!
Re: Removing Baur pillar covers
Posted: Thu May 05, 2011 9:06 pm
by keitht
drjim wrote:remove quarter lights, remove all the old sealant, undo the little phillips head screws that hold them on then prise away from the sealant underneath them.
Baur name badges pop off, but very easy to snap one of the prongs off.
I'll be reassembling mine tomorrow!
Thank you.
K