bmwe21.net forums

Hi,

I went to get a quote on a silencer both sides like the 323 on my 320/6......noticed there is a support beam where the exhaust brackets/arm is attached on the left side but on the right this is not there., is this there on the 323 and if so can u buy the part or would the exhaust place be better off making their own?

Thanks

Chris

You can buy the extra support peice from the Dealer and weld it on

http://bmwfans.info/parts/catalog/E21/S ... _exterior/

Jason

Thanks Jason

Looking at that I think I would need at least part 5 and 7....one of which is discontinued, bit pricey too when I have been quoted 320 for the exhausts from the middle silencer onwards, never expected that beam to cost that much. Think I will have a chat with the exhaust place as he seemed to think he could make something up for no extra cost, just thought it may have been better having the original support there

Bit of metal and a welder is all you need. My body bracket on the Baur is way too small at the moment so the zorst is held on with big loops of electrical cable. I'll stick some more metal on so I can use normal rubbers before it gets to the MOT stage.