bmwe21.net forums

Dear All
Your opinion sought here!
Thought this should go in General as it is hardly "technical"!!

1 We have "Herman" with blank bit between rear lights- hopefully here:


2 Do we install that black blanking piece like this:
http://www.alpina-archive.com/?p=3010&nmt=B6-2.8-187

3 Or do we install the Alpina silver stripes like the car below:
http://www.alpina-archive.com/?p=10040& ... B6-2.8-461

The point is that I have a silver DEKO set en route and could make the rear look like either- the black blanking piece I have found is immaculate but the boot is not drilled (yet) to accept same.
Please note that yes we will be getting rid of the Chinese Alpina Roundal (not even straight!) and having BMW ones fitted on bonnet and bootlid- before you ask....

BTW I am always being teased about the number of "Alpina" badges/stickers on Herman by Steve and others- I am getting there! It is all part of the "de-chavving" exercise being undertaken!

I'd go with stripes.

Two reasons: the silver striping makes a nice contrast with the blue paint, and it sets the car apart from other E21's that have a black plastic panel there.

Even without striping I think I still wouldn't install the panel.

+1

my personal order of preference is listed below.

1.Blanking plate as it matches spoiler.

2.Stripes...abit overkill imo.

3.Blank completely...dont look right somehow.

Thanks "Bumface"

how goes your stripekit? On schedule?

blank or with the the stripes if they go on
i dont like the plastic insert

I think I'm one of the only people so far who like a plastic insert, as is standard with all e21's. However, as your is a genuine Alpina, I think the stripes look 'correct' I really like your car, but would you consider reversing the shadowline? Doesn't look bad I guess, just think it would look better au naturale.

how do you mean- reversing the shadowline?
sorry I don't understand!

shadowline was the name of the option BMW gave for dechroming

arshad76 wrote:shadowline was the name of the option BMW gave for dechroming

Aha!

sorry would prefer to keep the shadow stuff- it was quite a performance getting rid of the sparkly black paint (don't ask!) and making it shadow black!

You can get dechrome tape that works pretty well and is simple enough to apply.

does it also work on the rubbing strips?

yes they have all been painted all chavvy spangly black (luckily doesn't show in the photos I have posted)

Need to replace the lot with unpainted matt black standard rubber.......... at some stage

well team we have gone with the Stripe kit

which is now fitted

I am not 100% happy with the stripes- I have Alun (who owns the only other B6 in GB) promise me he will take some measurements this weekend so we may compare!
pictures can be seen (hopefully) at:



and I will get around to removing the chinese alpina roundals soon- before you ask!

topcat my stripes are wide ones 55mm thin ones 10mm and the wide stripes are 10mm apart

cant see the pics