spacers for rear suspension
Posted: Fri Aug 03, 2012 1:45 pm
Dear Experts
After we fitted the RPM camber adjust top mounts we raised the front of Herman by about 1/2 inch
Unfashionable as it may seem I am happy with it being a bit higher than optimum ( the 3.5 motor is about 1/2 inch lower than the std 2.3) because it now doesn't foul my driveway- nor the hump in our multi storey carpark space near work
But it does mean that it is slightly down at the back- like a 2002
I would like to raise the rear
Are there some sort of spring cup spacers we can find somewhere
Thoughts please?
(We have std Alpina B6 suspension- after we ditched the KW coilovers as being far too rock hard for bumpy IOM roads- the KW were like concrete!)
After we fitted the RPM camber adjust top mounts we raised the front of Herman by about 1/2 inch
Unfashionable as it may seem I am happy with it being a bit higher than optimum ( the 3.5 motor is about 1/2 inch lower than the std 2.3) because it now doesn't foul my driveway- nor the hump in our multi storey carpark space near work
But it does mean that it is slightly down at the back- like a 2002
I would like to raise the rear
Are there some sort of spring cup spacers we can find somewhere
Thoughts please?
(We have std Alpina B6 suspension- after we ditched the KW coilovers as being far too rock hard for bumpy IOM roads- the KW were like concrete!)