Page 1 of 1

Indicators and wipers not working please help

Posted: Tue Dec 04, 2012 10:59 pm
by M15KYY
Hi guys

Just finished restoring my gold e21 316 and I have a strange problem with the some of the column controls, ie indicators and wipers, the hazard lights work perfectly but the indicators will not work at all, I have checked fuses and the earth to column but still no luck, I did take the pedal box out to paint the engine bay but don't think I disturbed anything, I did originally think it may be the indicator stalk switch itself buy I find it a little strange how the wiper controls have also stopped workin, anybody got any ideas or even better a wiring diagram for the indicators/ wiper setup??

Re: Indicators and wipers not working please help

Posted: Tue Dec 04, 2012 11:12 pm
by Jeroen
Perhaps you have a loose ground cable if both quit at the same time. Same story here, also check the fuses for corrosion...

Re: Indicators and wipers not working please help

Posted: Tue Dec 04, 2012 11:33 pm
by M15KYY
I've checked the earth to the column are there any other earthing places I should check?

Here are some pics of the car :-)

Image

Image

Image

I was best man for my mates wedding and took him to the church in it, I'm on the left

Image

Re: Indicators and wipers not working please help

Posted: Wed Dec 05, 2012 1:25 am
by arshad76
Sorry can't help with the indicators, but those wheel look awesome!

Re: Indicators and wipers not working please help

Posted: Wed Dec 05, 2012 2:47 am
by nas80
There's a earth point just after the fuse box in the engine bay.

Also clean terminals in the fuse box and the fuses themselves. This Defo helps.

Re: Indicators and wipers not working please help

Posted: Wed Dec 05, 2012 10:56 am
by M15KYY
Cheers nas!!! Ill check that and let you know if it works! Thanks buddy

Re: Indicators and wipers not working please help

Posted: Wed Dec 05, 2012 11:31 am
by e21-Mark
Last year I had problems with wipers & indicators and it was where the wires come through the bulkhead. One wire had worn through and would short out every now and then. Flasher unit also caused problems iirc.

Re: Indicators and wipers not working please help

Posted: Wed Dec 05, 2012 3:13 pm
by M15KYY
Where do they come through the bulkhead mark? Is it with the main loom to the fusebox on the top of the passenger side wing?

Re: Indicators and wipers not working please help

Posted: Wed Dec 05, 2012 3:18 pm
by e21-Mark
I seem to recall it was drivers side? Maybe my old and weary memory though. It drove me mental for weeks! Have you looked at the hazard switch too? Half the bloody loom seems to go through that thing!

Re: Indicators and wipers not working please help

Posted: Wed Dec 05, 2012 3:24 pm
by M15KYY
Yeah I've put a brand new hazard switch in and the hazards work perfectly :wtf

Re: Indicators and wipers not working please help

Posted: Wed Dec 05, 2012 10:21 pm
by Reck
The Haynes book of lies has a wiring diagram. Also, did you spin the fuses in their holders? They oxidise and stop making contact. I replaced two perfectly good headlight bulbs before working that out. :?

Re: Indicators and wipers not working please help

Posted: Wed Dec 05, 2012 11:20 pm
by rob0r
Looking sexy there, the car looks good too :P

Re: Indicators and wipers not working please help

Posted: Thu Dec 06, 2012 12:17 am
by M15KYY
@ Reck yeah buddy all the fuses are super clean and the terminals, of course the book of lies!! forgot i had one lol my suspicions are that nas maybe right with his suggestion about the earth points buy the fuse box. ive resprayed the engine bay so stands a chance theres paint somewhere there shouldnt be, and Rob you love it ya big homo!! :D