Page 1 of 1
Engine swap
Posted: Sun Mar 17, 2013 8:54 pm
by Shushman
Hi guys. Had a quick question. I was talking to a guy today who has an e21. And he said to me that you can drop an e30 2 or 2.5 litre engine into an e21 with the old e21 manual transmition without further work. Is this true? If so.... I feel an upgrade coming along soon.
Re: Engine swap
Posted: Sun Mar 17, 2013 9:10 pm
by drjim
e30 2.5 plus motronic is straightforward. You need about 3 wires from car to engine loom, then fit the ecu above the glovebox. Various minor niggles with sensors that have same connectors and can be swapped over giving no start, but lots of info on the forum. Check my Baur rebuildathon and Murrans motronic thread.
It's really quite easy if you have a 6 pot to start with.
Jim
Re: Engine swap
Posted: Sun Mar 17, 2013 9:45 pm
by Shushman
Cheers for the quick and helpful reply jim. Well. Unfortunatly mine is a 316. Do you know anyone who could do this swap for me?
Re: Engine swap
Posted: Sun Mar 17, 2013 10:00 pm
by drjim
Nas is the man for swaps
Re: Engine swap
Posted: Mon Mar 18, 2013 5:23 pm
by nas80
easy to do and yes bolts straight in, depends on obv if your starting off with a 320/6 or a 323i. Obv not as simple in a 316.
I can do the swap but theres about a month or two before i could start it..
Re: Engine swap
Posted: Tue Mar 19, 2013 12:24 am
by Shushman
Hey nas. Thanks for the reply. Well im not in a rush as funds are at an all time low atm. Would be around july/august. How much you think it would cost. Including your share roughly. Pm me if needed please.