Page 1 of 1
e30 m10 into e21
Posted: Tue Jul 16, 2013 12:36 pm
by verde
Im putting an automatic E30 M10 engine into my manual E21. I have removed the autobox and have a manual clutch fitted. The only problem is the pilot bearing is too narrow and i need another. Should I just buy a manual E21 bearing or should i get a manual E30 one?
Re: e30 m10 into e21
Posted: Tue Jul 16, 2013 1:53 pm
by nas80
They are the same outter diameter. You need to buy the one that matches your box.
Re: e30 m10 into e21
Posted: Tue Jul 16, 2013 2:18 pm
by Duracel79
This part number ( 11211709681 ) into here:
http://www.realoem.com/bmw/select.do
Gives the same bearing for most E30's and E21's with manual boxes.
Ben
Re: e30 m10 into e21
Posted: Tue Jul 16, 2013 5:46 pm
by verde
Standard, cheers lads. Il get work to order one, may have one in stock actually
Re: e30 m10 into e21
Posted: Tue Jul 16, 2013 5:54 pm
by nas80
Gsf stock them. They are a tenner.
Re: e30 m10 into e21
Posted: Tue Jul 16, 2013 6:41 pm
by verde
I work at BMW
Re: e30 m10 into e21
Posted: Wed Jul 17, 2013 4:33 pm
by PeteK
Lucky
