Page 1 of 1

not a very technical one

Posted: Sat Feb 27, 2016 9:55 am
by petroscf
Has anyone managed to stick something on this surface ??

Image

I tried contact glue and doublesided tape, both do not work!!

Re: not a very technical one

Posted: Sat Feb 27, 2016 11:29 am
by uwbuurman
Now, a gun is pretty heavy.... :bag

Re: not a very technical one

Posted: Sat Feb 27, 2016 11:48 am
by petroscf
:loll

no, actually it's a very light thingy
It's a bit like a remote control (my new car insurance gives this-it has a couple of call buttons and a small speaker-but still it's really light)
It should normally stick on a normal plastic surface, but this is something like pressed paper, with plastic colour on top?? Although I cleaned it thoroughly with alcohol, still it won't stick-and even if I manage to, it falls after a couple or three hours

Re: not a very technical one

Posted: Sat Feb 27, 2016 11:49 am
by petroscf
will take a pic of it later today

Re: not a very technical one

Posted: Sat Feb 27, 2016 9:59 pm
by steve5134
Have you tried the sticky pads you can get to hold a number plate on :)

Re: not a very technical one

Posted: Sun Feb 28, 2016 6:54 pm
by petroscf
Ok
I used velcro tape and keep my fingers crossed, however it seems to be working!
Forgot to take a pic anyway