Page 1 of 1
Up graded to a m50 manifold on the m52 engine
Posted: Tue Mar 08, 2016 4:19 pm
by raseeda green
Having a few problems hope someone can help.
I've upgraded the manifold on the m52 engine, but it's running bit rough lumpy like the mixtures not right, stalling at times
Can It be that I need the m50 throttlebody as well.?
Thank you
Re: Up graded to a m50 manifold on the m52 engine
Posted: Tue Mar 08, 2016 4:46 pm
by jimbob
Ive read that when you do the m50 intake upgrade it will take a week or two for it to settle down as the ecu relearns
allso have u checked for air leaks as this can happen after an intake swap.
hope this helps
Re: Up graded to a m50 manifold on the m52 engine
Posted: Wed Mar 09, 2016 7:29 pm
by raseeda green
Ok will do jimbob, cheers
Re: Up graded to a m50 manifold on the m52 engine
Posted: Thu Mar 10, 2016 12:03 am
by nas80
You have an airleak
Re: Up graded to a m50 manifold on the m52 engine
Posted: Thu Mar 10, 2016 2:39 pm
by raseeda green
Hi nas would I need the m50 throttlebody too
Cheers
Re: Up graded to a m50 manifold on the m52 engine
Posted: Fri Mar 11, 2016 1:04 am
by nas80
No u can use the one on it. Bolts on. Just make sure the seal is good