My Ride - Ichiwan, Malaysia
Posted: Tue May 03, 2005 5:36 pm
Modifications and tuning
Engine Bay -
Stroked M20 6 Cylinder, 2.3 litre (edited 20100819)
8 pcs of Cyclone/Tornado - 1 in each inlet manifold; 1 in the air intake; 1 above the carb.
1 pc Broquet B30 in-line fuel catalyst (To be changed to B60 soon).
Earth cables
2 pcs Pivot Voltage Stabiliser
Denso Iridium Power Spark Plugs (0.4 mm electrode)
SS Braided Brake Hoses
E28 Brake Booster
Girling (Volvo 240) calipers conversion (edited 20100819)
Exterior
Hartge 15x7 rims; PCD100, offset:12mm
Goodyear F1 GS-D3 195/50 Front; 195/55 Rear - ZR15
Custom/unknown bodykit - front - (edited 20100819) removed side skirts and rear apron
Foha rear spoiler (edited 20100819)
Hella FF75 Driving lights.
Interior
Recaro seats with net head restraint.
Nardi Gara 4 Steering
Digital voltage meter
M-tec pedal covers.
Short shifter
Custom meter cluster above HVAC, water temp, oil pressure, oil temp.
Sound System
Sony CDX-M800 w 10 disc changer.
Dragster 4-Channel Amp
Focal K2P 6inch midrange and tweeters
Focal Subwoofer (box)
2 Capacitors
2-channel Audio Control
Pivot Voltage Stabiliser for Audio.
History
Owned by immediate family, from my Mum, my Bro, then Moi! Been using it since 1994.
Future things to do:
Stroking to 2.3 (to run with Solex 4A1 Carb) - done (edited 20100819)
Performance Cam (Schrick 288) & Schrick Valve springs. (have them - not fitted yet) (edited 20100819)
Hartge Front strut bar.
Triple weber conversion (have carbs but need to do other things first)(edited 20100819)
New paint job(edited 20100819) (replaced rusty passenger side door)
Exhaust system(edited 20100819)
Inlet manifold for triple weber conversion (edited 20100819)
To get Hartge front spoiler made in fibreglass.(edited 20100819)
Engine Bay -
Stroked M20 6 Cylinder, 2.3 litre (edited 20100819)
8 pcs of Cyclone/Tornado - 1 in each inlet manifold; 1 in the air intake; 1 above the carb.
1 pc Broquet B30 in-line fuel catalyst (To be changed to B60 soon).
Earth cables
2 pcs Pivot Voltage Stabiliser
Denso Iridium Power Spark Plugs (0.4 mm electrode)
SS Braided Brake Hoses
E28 Brake Booster
Girling (Volvo 240) calipers conversion (edited 20100819)
Exterior
Hartge 15x7 rims; PCD100, offset:12mm
Goodyear F1 GS-D3 195/50 Front; 195/55 Rear - ZR15
Custom/unknown bodykit - front - (edited 20100819) removed side skirts and rear apron
Foha rear spoiler (edited 20100819)
Hella FF75 Driving lights.
Interior
Recaro seats with net head restraint.
Nardi Gara 4 Steering
Digital voltage meter
M-tec pedal covers.
Short shifter
Custom meter cluster above HVAC, water temp, oil pressure, oil temp.
Sound System
Sony CDX-M800 w 10 disc changer.
Dragster 4-Channel Amp
Focal K2P 6inch midrange and tweeters
Focal Subwoofer (box)
2 Capacitors
2-channel Audio Control
Pivot Voltage Stabiliser for Audio.
History
Owned by immediate family, from my Mum, my Bro, then Moi! Been using it since 1994.
Future things to do:
Stroking to 2.3 (to run with Solex 4A1 Carb) - done (edited 20100819)
Performance Cam (Schrick 288) & Schrick Valve springs. (have them - not fitted yet) (edited 20100819)
Hartge Front strut bar.
Triple weber conversion (have carbs but need to do other things first)(edited 20100819)
New paint job(edited 20100819) (replaced rusty passenger side door)
Exhaust system(edited 20100819)
Inlet manifold for triple weber conversion (edited 20100819)
To get Hartge front spoiler made in fibreglass.(edited 20100819)
