Yes...Is anyone willing to share the CAD file for the brackets?nightbear wrote:So, is anyone going to post the brackets blueprint? Would really appreciate that!
Wilwood 4 pot fitting - walkthrough
Re: Wilwood 4 pot fitting - walkthrough
Re: Wilwood 4 pot fitting - walkthrough
what a community.
I dont mind sharing any knowledge I have of my car. I have a t3/t4 fitted m10b20 MS2 '81 street maniac monster, so any questions welcome.
really thought that it is not that big of a deal to share the blueprint so that we don't have to do the same job twice.
I dont mind sharing any knowledge I have of my car. I have a t3/t4 fitted m10b20 MS2 '81 street maniac monster, so any questions welcome.
really thought that it is not that big of a deal to share the blueprint so that we don't have to do the same job twice.
- Jeroen
- Site Admin
- Posts: 29532
- Joined: Tue Sep 14, 2004 12:23 pm
- My E21(s): '81 323i Baur
- Location: The Netherlands
- Contact:
Re: Wilwood 4 pot fitting - walkthrough
Agree, but apparently no one has access to it?
More info on your street monster is more than welcome btw, but prolly belongs to the off topic section?
More info on your street monster is more than welcome btw, but prolly belongs to the off topic section?
Regards/groeten, Jeroen
Re: Wilwood 4 pot fitting - walkthrough
Don't you have them fitted to your car? Or are you using the volvo upgrade?
Re: Wilwood 4 pot fitting - walkthrough
Is there a chance that you could measure them up?
- Jeroen
- Site Admin
- Posts: 29532
- Joined: Tue Sep 14, 2004 12:23 pm
- My E21(s): '81 323i Baur
- Location: The Netherlands
- Contact:
Re: Wilwood 4 pot fitting - walkthrough
Can't do a decent job without taking it all apart which I'm not prepared to do if you don't mind. Better keep watching this place, the brackets do pop up every now and then.
Regards/groeten, Jeroen
Re: Wilwood 4 pot fitting - walkthrough
ok no prob
where did you get them?
at some point I read somewhere here that someone is making them for quite a reasonable price, was it?
where did you get them?
at some point I read somewhere here that someone is making them for quite a reasonable price, was it?
- Jeroen
- Site Admin
- Posts: 29532
- Joined: Tue Sep 14, 2004 12:23 pm
- My E21(s): '81 323i Baur
- Location: The Netherlands
- Contact:
Re: Wilwood 4 pot fitting - walkthrough
Believe Jason had them made, I had them remade by a local business in an even better quality and I'm trying to get him to make some more but he's not willing to share any info about them.
Regards/groeten, Jeroen
Re: Wilwood 4 pot fitting - walkthrough
tja spytig
but i'll manage
but i'll manage
Re: Wilwood 4 pot fitting - walkthrough
still no chance?
can you try to order a pair made?
I am even willing to drop by to pick them up
can you try to order a pair made?
I am even willing to drop by to pick them up
- e21-Mark
- E21 Master
- Posts: 5715
- Joined: Fri Mar 21, 2008 2:19 pm
- My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
- Facebook page: https://www.facebook.com/JackyardBackoff
- Location: Cornwall - UK
Re: Wilwood 4 pot fitting - walkthrough
Ideally you just need a pair to copy or the CAD drawing. They're basic enough but measurements need to be accurate obviously.
Re: Wilwood 4 pot fitting - walkthrough
problem is - noone wants to measure them. which is quite simple and a great thing for the community.
the profit that you can make off of making them is going to barely cover your pair, so it's not really worth to hide it, have no idea why noone signed up for this.
in our community you would get thrown cakes at for that. and no sweet ones, be sure of that.
the profit that you can make off of making them is going to barely cover your pair, so it's not really worth to hide it, have no idea why noone signed up for this.
in our community you would get thrown cakes at for that. and no sweet ones, be sure of that.
Re: Wilwood 4 pot fitting - walkthrough
its not that mate.. people bought them and then stuck them on the car and it means that you cant get a chance to measure them? nothing to do with price, when we got them they were v.cheap.
[img]http://s13.photobucket.com/albums/a285/nasbucket/forumsig.jpg[/img]
Re: Wilwood 4 pot fitting - walkthrough
If anyone has a bracket I can get cads done. I have cads for the front and rear brake setup on my e21 and I've passed them to a few engineers for pricing but they are only suitable for 300mm disks and not standard e21 323 disks.
1986 E28 M535i - Car stripped to shell ready to be blasted
1981 E21 323i - 2.8 24v on throttle bodies & cams - 3.0 conversion soon.
[img]http://i3.photobucket.com/albums/y99/Arnold_the_swimmer/My%20M535i/IMG_0447sig-1.jpg[/img]
1981 E21 323i - 2.8 24v on throttle bodies & cams - 3.0 conversion soon.
[img]http://i3.photobucket.com/albums/y99/Arnold_the_swimmer/My%20M535i/IMG_0447sig-1.jpg[/img]