BBS RS

Silver Surfer · Post by **Silver Surfer** » Thu Jul 15, 2010 3:41 pm

I was originally for the 16's as well (as per that picture), but after checking out Rasb1's car rolling with RS070's I decided that would be the way to go.

16's will look awesome though but be ready to be pushing some spacers, unless you change the dish on the wheels which will in turn effect the offset (I believe).

Good luck with the hunt.

Rav320uk · Post by **Rav320uk** » Thu Jul 15, 2010 3:43 pm

16" will be ok, won't foul the Track rod at all.

Silver Surfer · Post by **Silver Surfer** » Thu Jul 15, 2010 3:50 pm

But that depends on the offset of the wheel. If it's like an offset of 20 (or even as high as 30's - the offset the Dub boys roll) you'll need spacers to clear the track rods on the front wheels.

If it's slammed to the floor with 16's you'll prob need to do some arch rolling as well. 15's on my (which is not slammed) still causes rubbing when turning at full lock, and my wheels are the perfect offset. Obviously tyre wall size comes in to this as well.

Rav320uk · Post by **Rav320uk** » Thu Jul 15, 2010 3:54 pm

Yep, all the above needs to be cosidered if you choose to run the Wrong RS's

Silver Surfer · Post by **Silver Surfer** » Thu Jul 15, 2010 3:59 pm

It will be worth the effort though

Talking of which I need to get my ass in gear and get my RS dishes/centre caps ordered, tyred and then fitted.

Jason_323i · Post by **Jason_323i** » Thu Jul 15, 2010 6:37 pm

You can get bit more offset with 16's but not much I have some sperical bearing trackrod ends which give about another 8mm on my car

Jason