BMW County Championship

Anything that doesn't fit the other categories. Direct link: How to post photos and videos
Post Reply
User avatar
e21-Mark
E21 Master
Posts: 5715
Joined: Fri Mar 21, 2008 2:19 pm
My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
Facebook page: https://www.facebook.com/JackyardBackoff
Location: Cornwall - UK

BMW County Championship

Post by e21-Mark »

I found this yesterday...

Image

Some of the drivers race suit patches.

Image

Never mind the cars even the badge is rusting!

Image

Image

Some BMW press releases with race results, championship standings, prize money etc.

Image

Image

They were the days...

Image

When I get a bit more time I will type everything out but here's the car specifications to be going on with...

Anatomy of the BMW County Championship

The BMW 323i's which are representing their respective counties in this year's BMW County Championship initially started life as standard road cars. They were transported straight from BMW Munich where they were taken to Tom Walkinshaw Racing at Kidlington, Oxford. Tom, together with Hugo Tippet, the team manager and 6 racing technicians then modified the cars to racing specifications which were as follows :-

BMW 323i - County Car Specification

* 2.3 litre engine balanced throughout
* Gas flowed cylinder head polished and raised compression to 9.8:1
* Brake tested to deliver 170bhp
* Heavy duty clutch
* Front struts specially rebuilt to TWR Racing settings, with stiffer springs and adjustable abutments.
* Competition rear dampers have adjustable bump and rebound settings with stiffer springs.
* Adjustable front anti roll bar of 24mm fitted in addition to standard one.
* Rear one of 19mm also fitted.
* Limited Slip Differential fitted with reinforced rear crossmember mountings.
* Racing brake pads front and rear have been specially made with additional ventilation to the discs.
* Mahle wheels 6Jx13 are fitted with Dunlop racing tyres.
* Body stripped of all interior trim, fitted with FIA roll cage front and rear, competition high back driving seat, BMW Motorsport steering wheel, four point racing harness, 2.5 kilo FE1301 plubed in extinguishing system, battery cut off switch and reinforced fuel tank.
* Specially made fibreglass bonnet and boot lids fitted. The boot lid carries a rear wing and there is a special racing air dam at the front.
* A special free flow exhaust system is fitted complying with the 1980 RAC noise regulations.
:launch


User avatar
E21meister
E21 Pro
Posts: 915
Joined: Fri Jul 24, 2009 6:46 pm

Re: BMW County Championship

Post by E21meister »

Another 5 seconds and that was mine, all mine!!! :cry: :D Oh well, I'll have to make do with the 70's Motorsport brochure I guess... 8)
Image
Post Reply