as above?
cheers
e30 springs fit e21?
Re: e30 springs fit e21?
also do you think these will fit a e21? http://cgi.ebay.co.uk/HONDA-CIVIC-88-00 ... 27b4dcb946
-
Reck
- E21 Pro
- Posts: 823
- Joined: Mon Mar 29, 2010 12:26 am
- My E21(s): 83 316, 1.8 M10, RHD
- Location: Manchester, UK
Re: e30 springs fit e21?
Why not buy springs made for an e21?
- e21-Mark
- E21 Master
- Posts: 5715
- Joined: Fri Mar 21, 2008 2:19 pm
- My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
- Facebook page: https://www.facebook.com/JackyardBackoff
- Location: Cornwall - UK
Re: e30 springs fit e21?
If you want to make your own coilovers just use Rally Design components or buy the finished article from Gaz at www.raceperformancemodified.com
Re: e30 springs fit e21?
had a look and the springs rally design supply are the same but different rates! works out cheaper for the ebay jobs also.
reck because 60mm is for knob gobblers gays and confused people. i want 80-90mm
reck because 60mm is for knob gobblers gays and confused people. i want 80-90mm
Re: e30 springs fit e21?
80-90mm, DIY coilovers or GAZ. If you do DIY coilovers it would be best to shorten the struts and use shorter inserts (E30 2" shorter, saxo 3-4" shorter)


Re: e30 springs fit e21?
I can lower my e21 so the sills sit on the floor and im using the rally design coilover conversion kit, costs about £200 and gives you decent hieght adjustable suspension. then its just a case of buying decent dampers but if your not too fussy bumping around the place then just stick with the stock ones
BMW e21 - 320tsi - Project Rajay
Audi 50 RS
1/2 a BMW 2002 tii - Project Nipon
Smart 4/2 84bhp cabriolet - Company car
Audi 50 RS
1/2 a BMW 2002 tii - Project Nipon
Smart 4/2 84bhp cabriolet - Company car