Another 320/6 to 325i conversion

murran · Post by **murran** » Sat Jan 29, 2011 2:53 pm

right,
ive got the clutch. was £106.80.
water pump is ordered for tuesday. £26.
exhaust manifold gaskets ive took the liberty of ordering too (tuesday). £3 each x2.

so apart from about £1, thats your 140 quid all gone!

DrGonzoPOW · Post by **DrGonzoPOW** » Sat Jan 29, 2011 4:09 pm

Thats awesome, cheers mate! Whats that bearing called i need to get for the gearbox again ? Will ave a trip to BMW Monday morning

DrGonzoPOW · Post by **DrGonzoPOW** » Sat Jan 29, 2011 4:59 pm

Do you guys an extra circuit breaker/fuse at the battery when its in the boot ?

e21-Mark · Post by **e21-Mark** » Sat Jan 29, 2011 5:00 pm

Spigot bearing.

murran · Post by **murran** » Sat Jan 29, 2011 6:57 pm

your welcomes!

^^^ what mark said.

fuse for what?

DrGonzoPOW · Post by **DrGonzoPOW** » Sat Jan 29, 2011 7:07 pm

For the battery in boot. Heard people saying that if you run a long wire its at risk of spike's and all that jazz. Putting a 75 amp circuit breaker next to the battery is a goos idea? Or is it just being over cautious ?

e21-Mark · Post by **e21-Mark** » Sat Jan 29, 2011 7:26 pm

It won't hurt but not crucial afaik.

rob0r · Post by **rob0r** » Sun Jan 30, 2011 7:51 pm

The E36 cable I have certainely doesn't have one, does any BMW cable?? I wouldn't bother.

DrGonzoPOW · Post by **DrGonzoPOW** » Sun Jan 30, 2011 7:54 pm

Probably wont mate. Might get one somewhere down the line if i put a half decent sound system in it

DrGonzoPOW · Post by **DrGonzoPOW** » Sun Jan 30, 2011 9:29 pm

btw Murran, found my loom and it looks like its got them relays on

DrGonzoPOW · Post by **DrGonzoPOW** » Fri Feb 04, 2011 12:47 am

Looking at realoem for this spigot bearing you guys speak of
http://www.realoem.com/bmw/showparts.do ... g=11&fg=20
Is it number 1 of this pic ? Do i need the 320/6 one or 325i one, or are they both the same anyway?
Gave the engine a bit of a clean up while i was bored at work today

Got my front pipes delivered so can use my stock exhaust for now. Took the log manifold off but discovered a snapped stud. Will get the easy outs on the case.

DrGonzoPOW · Post by **DrGonzoPOW** » Sat Feb 05, 2011 5:25 pm

Can anyone advise me on this spigot bearing!!!!!!!!!!!!!! I need to get one from BMW but dont know which one to get

e21-Mark · Post by **e21-Mark** » Sat Feb 05, 2011 5:26 pm

It's number 1 and you need the 2.5 engine one afaik.

DrGonzoPOW · Post by **DrGonzoPOW** » Sat Feb 05, 2011 5:29 pm

Ahhhhhh, thanks!!

bmwe21.net forums

Another 320/6 to 325i conversion

Re: Oh No! Another 325 Conversion

Re: Oh No! Another 325 Conversion

Re: Oh No! Another 325 Conversion

Re: Oh No! Another 325 Conversion

Re: Oh No! Another 325 Conversion

Re: Oh No! Another 325 Conversion

Re: Oh No! Another 325 Conversion

Re: Oh No! Another 325 Conversion

Re: Oh No! Another 325 Conversion

Re: Oh No! Another 325 Conversion

Re: Another 320/6 to 325i conversion

Re: Another 320/6 to 325i conversion

Re: Another 320/6 to 325i conversion

Re: Another 320/6 to 325i conversion