my WARHORSE - 320i turbo

[chelby5]

one side ready ->

Hi, I'm sorry for my english
There may be more about big brakes and a transition to 5х120

[DC]

I used 5x120 hubs from e12; rotors and calipers from 330i e46 with adapters

[chelby5]

I used 5x120 hubs from e12; rotors and calipers from 330i e46 with adapters

Thank you. You can picture the adapter
Photos from the other side

[DC]

oil change

[DC]

new low pressure fuel supply pump for swirl pot

[nicks85]

Looks fantastic...

[DC]

Roxanne with her driver Lenka - ready for first drift race

[alschux]

I am loving your motor and all the M10 mods you've done - big respect. I thought the look just lost a little bit with the Azev's on, but the big Alpina's are absolutely thuggish! Awesome stuff... how do they not rub tho?

[DC]

Azev´s are only temporary till rear conversion to 5x120 - I have 10x17" Alpina´s ready for rear axle then and also some Zender and Hartge stuff ...

I had a bit of luck and good choice of tire - 205/40/17 is quite narrow and it´s working fine - no rubbing at all during normal driving - I am gonna try it during drifting this weekend

[DC]

We was at drift event yesterday and car was working great without single problem. Only thing is that power is over 3500 rpm - then it is burning rubber very well - till 3500 is that engine quite weak because of that 300° cam.

I have only these pictures now, more should be there later...







start number - coincidence?

[DC]

next doriftoo

[DC]

I solved acceleration enrichment in megasquirt today so I am quite happy

[Danny043]

Amazing picture!

[DC]

we was at dyno today and result is here
dark colors are stage 2 with 300° dBilas cam
light colors are from stage 1

[raseeda green]

love it.