Solex 4A1 (320/6)

For all your questions, problems and DIY stories
Post Reply
User avatar
redline
Upcoming E21 fanatic
Posts: 103
Joined: Sat Feb 17, 2007 12:08 pm
Location: Singapore

Solex 4A1 (320/6)

Post by redline »

My 4A1 is leaking. This is kinda "normal" for this carb of a certain age. My questions are:

1 Is this due to the gasket or the carb is warped?
2 will a repair/service kit solve my problem?

Cheers


User avatar
Peter V.
E21 VIP
E21 VIP
Posts: 12128
Joined: Sun Mar 30, 2008 12:42 pm
My E21(s): '82 320/6
Location: Breda, Nederland

Re: Solex 4A1 (320/6)

Post by Peter V. »

That depends what is leaking offcourse.

A standard repairset has the gaskets of the complete carb. The bottemgasket (the thick one) is not in the set included.
Gr Peter V.

.Some say he eats nuts and bolts for breakfast, all we know is he is called the carburetorman.

BMW E21, 1981 320/6 Ascot Grau.
BMW E85, 2004 Z4 2.5i Sterling Grau.
BMW F25, 2014 X3 xDrive 2.8i Space Grau.
User avatar
redline
Upcoming E21 fanatic
Posts: 103
Joined: Sat Feb 17, 2007 12:08 pm
Location: Singapore

Re: Solex 4A1 (320/6)

Post by redline »

It is leaking petrol (gas to some folks). Petrol is dripping at the bottom of the carb on the outside. Petrol is also leaking inside the throat and jets.
Reck
E21 Pro
Posts: 823
Joined: Mon Mar 29, 2010 12:26 am
My E21(s): 83 316, 1.8 M10, RHD
Location: Manchester, UK

Re: Solex 4A1 (320/6)

Post by Reck »

Get a Weber!
User avatar
Peter V.
E21 VIP
E21 VIP
Posts: 12128
Joined: Sun Mar 30, 2008 12:42 pm
My E21(s): '82 320/6
Location: Breda, Nederland

Re: Solex 4A1 (320/6)

Post by Peter V. »

This means indeed that the gaskets are worn. Please make sure that you fasten the carbpart at the right torq. If you fasten them to much you disform the three main parts and you keep leaking fuel and air.

Or indeed convert to a weber.
Gr Peter V.

.Some say he eats nuts and bolts for breakfast, all we know is he is called the carburetorman.

BMW E21, 1981 320/6 Ascot Grau.
BMW E85, 2004 Z4 2.5i Sterling Grau.
BMW F25, 2014 X3 xDrive 2.8i Space Grau.
User avatar
redline
Upcoming E21 fanatic
Posts: 103
Joined: Sat Feb 17, 2007 12:08 pm
Location: Singapore

Re: Solex 4A1 (320/6)

Post by redline »

i am indeed considering a weber......do you know where I can order one??? I am in Asia.
User avatar
Tato
Upcoming E21 fanatic
Posts: 58
Joined: Thu Apr 17, 2008 4:05 pm
My E21(s): 1980 E21 316/1 manual
Location: Montevideo, Uruguay
Contact:

Re: Solex 4A1 (320/6)

Post by Tato »

You can buy a complete kit right here.
http://www.racetep.com/weber/bmwkit.html

Kit number is K248. It replaces Solex 4a1.

It is a very good upgrade.

Not cheap.

Regards,
1980 316/1
User avatar
redline
Upcoming E21 fanatic
Posts: 103
Joined: Sat Feb 17, 2007 12:08 pm
Location: Singapore

Re: Solex 4A1 (320/6)

Post by redline »

on the order form the k248 is listed to fit Mercedes Benz........i supose it is the same.............. :hammer
User avatar
DrGonzoPOW
E21 Pro
Posts: 990
Joined: Sat May 31, 2008 4:44 pm
Location: West Yorkshire

Re: Solex 4A1 (320/6)

Post by DrGonzoPOW »

Who's going to be the first to say.......(whisper-325)
Wakefield Hellfire
Image
User avatar
murran
E21 Pro
Posts: 1309
Joined: Fri Nov 09, 2007 9:20 pm
Location: sheffield

Re: Solex 4A1 (320/6)

Post by murran »

DrGonzoPOW wrote:Who's going to be the first to say.......(whisper-325)
lol at gonzo, i'll say it... fit injection from an e30 325i, attached to the e30 injection will be an engine....... fit that bit too. :launch
Image
Jeroen wrote:Bmwe21.net, for all your insurance solutions :P
User avatar
redline
Upcoming E21 fanatic
Posts: 103
Joined: Sat Feb 17, 2007 12:08 pm
Location: Singapore

Re: Solex 4A1 (320/6)

Post by redline »

naughty..naugthy...........now i must sleep on it..........
Post Reply