Speedometer advice

For all your questions, problems and DIY stories
Post Reply
User avatar
costask2
Newbee
Posts: 14
Joined: Tue Mar 15, 2011 4:36 pm
My E21(s): ´82 315 powered by s14
Location: Thessaloniki, Greece

Speedometer advice

Post by costask2 »

Hi all,

I have an issue which I would like to discuss ore get some advice.

I have complet my s14 swap to my e21 with motor and gearbox (getrag 265) euro spec. and I´m running the e21 323 rear.
Due to the gearbox swap I can´t install the speedo wire to the gearbox so I´m wondering if any of you have experienced the same issues and how did you solve it? I´m looking to have as original look as possible. I´ve done some research on the forum but haven´t got a clear answer..

looking forward to some help..

rgds Kostas


-----BMW don´t follow the technology, BMW leads it-----

BMW e21 S14
BMW e46 325ti
BMW e38 740iL
User avatar
nas80
E21 Mad
Posts: 2975
Joined: Sun Jun 14, 2009 12:12 am
Location: West Yorkshire

Re: Speedometer advice

Post by nas80 »

You have to fit the back of an electric speedo from another bmw into the face of the original. Not easy and id question the accuracy too.
[img]http://s13.photobucket.com/albums/a285/nasbucket/forumsig.jpg[/img]
User avatar
costask2
Newbee
Posts: 14
Joined: Tue Mar 15, 2011 4:36 pm
My E21(s): ´82 315 powered by s14
Location: Thessaloniki, Greece

Re: Speedometer advice

Post by costask2 »

Yes that would be an idea, but I still need to pick up the rotation from somewhere, as I still have the e21 rear differential.. I´ve heard that the getrag 265 box has the opening to install the gear for the speedocable in the box and that it just plugged.. I´m trying to find out if its true or not and searching around...
-----BMW don´t follow the technology, BMW leads it-----

BMW e21 S14
BMW e46 325ti
BMW e38 740iL
User avatar
nas80
E21 Mad
Posts: 2975
Joined: Sun Jun 14, 2009 12:12 am
Location: West Yorkshire

Re: Speedometer advice

Post by nas80 »

you can get a device the kit car guys use - it fits on the prop and uses a hall sender which sends the signal to the speedo.

this is an example http://www.greengauges.com/help/faq4.asp
[img]http://s13.photobucket.com/albums/a285/nasbucket/forumsig.jpg[/img]
Post Reply