Control arms.

problemchild75 · Post by **problemchild75** » Thu Mar 21, 2013 8:33 am

control arms

Eddie. · Post by **Eddie.** » Thu Mar 21, 2013 9:13 am

If they're in good nick then yeah?

Kinda don't want to replace old for old though, or are they relatively new?

mr edd · Post by **mr edd** » Fri Mar 22, 2013 5:50 am

face lift control arms can be fitted to pre facelift cars but need the antiroll bar and the engine crossmember off the facelift car to work....

Eddie. · Post by **Eddie.** » Fri Mar 22, 2013 9:55 am

Thought someone said it was just the ARB?

Didn't know anything about the crossmember?

e21-Mark · Post by **e21-Mark** » Fri Mar 22, 2013 10:19 am

Have you tried all of these suppliers on eBay?

http://www.ebay.co.uk/sch/i.html?_trksi ... &_from=R40

johne21 · Post by **johne21** » Fri Mar 22, 2013 10:20 am

Fitted late type control arms and 323 anti-roll bar to my 1976 320i, did'nt change crossmember.

e21-Mark · Post by **e21-Mark** » Fri Mar 22, 2013 10:34 am

I might even have a 323 ARB you can have?

Eddie. · Post by **Eddie.** » Fri Mar 22, 2013 11:39 am

e21-Mark wrote:Have you tried all of these suppliers on eBay?

http://www.ebay.co.uk/sch/i.html?_trksi ... &_from=R40

Yeah, the ones in that link seem to be right.

e21-Mark wrote:I might even have a 323 ARB you can have?

Could you have a look, and if so, how much would you be after?

I'd happily upgrade to the 323 ARB, as I'll just get later control arms and some Polybushes, which I'm pretty sure Jamie said he had some of.

e21-Mark · Post by **e21-Mark** » Fri Mar 22, 2013 4:22 pm

I'll check in the morning.

I mailed C3 for you and they can get yours in a few days for £76 each.

e21-Mark · Post by **e21-Mark** » Sat Mar 23, 2013 10:57 am

I've got a spare 323 ARB here which you can have for free. It's quite heavy though. Where are you based? A friendly forum member might be able to help out in getting it to you?

mr edd · Post by **mr edd** » Sat Mar 23, 2013 12:20 pm

pic of early (top) and later(bottom) crossmembers .. arms connect to crossmember closer to front of car on later cars with later arms (early cars have straight crossmember)...hence crossmember needed as well as arms and antiroll bar to fit later control arms
http://i764.photobucket.com/albums/xx28 ... werres.jpg

Eddie. · Post by **Eddie.** » Sat Mar 23, 2013 8:57 pm

Can anyone confirm if I will need a crossmember or not?

Mark, would you post it if I cover all your costs?

e21-Mark · Post by **e21-Mark** » Sat Mar 23, 2013 9:12 pm

Yes, although Nas might bring it back with him if you ask nicely.

rob0r · Post by **rob0r** » Sun Mar 24, 2013 10:50 pm

I have a brand new set of earlier control arms, £45 delivered

AndyBaur · Post by **AndyBaur** » Tue Apr 16, 2013 11:35 pm

e21-Mark wrote:http://www.ebay.co.uk/sch/i.html?_trksi ... &_from=R40

Just looked at this recommendation - prices look good @ £21.17 each. Don't know the manufacturer Firstline & although I specified a 1982 E21 in the compatibility check, it says 'E21 [1975-1984]' (clearly not right) & in the specifics it says 1975-1978 (obviously the pre-facelift model).

I'm reluctant to order with the details being so ambiguous & contradictory.

All other prices seem to be the same or higher than Walloth & Nesch. Shame I didn't order at the same time as the top mounts.

Wasn't there a post that was looking at replaceable balljoints for the control arms?

bmwe21.net forums

Control arms.

Re: Control arms.

Re: Control arms.

Re: Control arms.

Re: Control arms.

Re: Control arms.

Re: Control arms.

Re: Control arms.

Re: Control arms.

Re: Control arms.

Re: Control arms.

Re: Control arms.

Re: Control arms.

Re: Control arms.

Re: Control arms.

Re: Control arms.