Hello from finland!!! my First Projekt!! E21 323i

Basso · Post by **Basso** » Mon Sep 18, 2006 10:01 am

this is my projekt.
i startet it in january 2006.
All rost has been removed!!

you can see pictures in this website. pictures startet in page 4.
http://www.btcf.fi/forum/showthread.php?t=50793

Jeroen · Post by **Jeroen** » Mon Sep 18, 2006 10:12 am

Welcome here! Looks like quite a project... having some difficulties reading the comments though

Basso · Post by **Basso** » Mon Sep 18, 2006 11:32 am

Jeroen wrote:Welcome here! Looks like quite a project... having some difficulties reading the comments though

Jeah!!

finnish is not the easyest languages!!

but i can try to answear the questions

but my english language is very bad!!

Jeroen · Post by **Jeroen** » Mon Sep 18, 2006 11:41 am

Well at least your english is not as bad as my finnish!

Basso · Post by **Basso** » Mon Sep 18, 2006 12:32 pm

Jeroen wrote:Well at least your english is not as bad as my finnish!

Basso · Post by **Basso** » Mon Sep 18, 2006 1:33 pm

my e21 1979

is tuned 2.3li motor 180hp and 230nm

wheels 16" Borbet A desing front is 7" and back 9" and 16mm spacer´s...

rolfi · Post by **rolfi** » Mon Sep 18, 2006 4:21 pm

Hey Basso. If you speak swedish or something I can translate

Looks like a great project, and like you're actually getting something done. That's good! I was just looking at the pics, but are you planning to use the Dietel bodykit? I saw you had a pic of the Dietel turbo somewhere on page 4-9.

I could tell you a lot about rust, but it looks like you've found out

http://img529.imageshack.us/my.php?image=auto0037yw.jpg http://img118.imageshack.us/my.php?image=auto0060nf.jpg
http://img355.imageshack.us/my.php?image=auto1178cg.jpg

EDIT1: [img to [url
EDIT2: I said Dietel aye? Let me read everything before i post something the next time

-creative- · Post by **-creative-** » Mon Sep 18, 2006 8:20 pm

looking good.. keep up the good work.

Basso · Post by **Basso** » Tue Sep 19, 2006 8:15 am

rolfi wrote:Hey Basso. If you speak swedish or something I can translate

Looks like a great project, and like you're actually getting something done. That's good! I was just looking at the pics, but are you planning to use the Dietel bodykit? I saw you had a pic of the Dietel turbo somewhere on page 4-9.

I could tell you a lot about rust, but it looks like you've found out http://img529.imageshack.us/my.php?image=auto0037yw.jpg http://img118.imageshack.us/my.php?image=auto0060nf.jpg
http://img355.imageshack.us/my.php?image=auto1178cg.jpg

EDIT1: [img to [url
EDIT2: I said Dietel aye? Let me read everything before i post something the next time

I dont speak swedish (i dont like that language

)

ööhmmm some rost hole

the hole back has been rebuilt!
but now it looks great..that picture you can see it has no rost at all (sandflow whit sand pistol ) http://img454.imageshack.us/my.php?image=184gr8.jpg and back of the picture you can see M3 e30 body work.. i built it

i try to keep it original

... mayby bbs front bunber. and original cromebumpers. thats all.

rolfi · Post by **rolfi** » Wed Sep 20, 2006 3:39 pm

Basso wrote: I dont speak swedish (i dont like that language )

ööhmmm some rost hole the hole back has been rebuilt!
but now it looks great..that picture you can see it has no rost at all (sandflow whit sand pistol ) http://img454.imageshack.us/my.php?image=184gr8.jpg and back of the picture you can see M3 e30 body work.. i built it

i try to keep it original ... mayby bbs front bunber. and original cromebumpers. thats all.

Okay then.

The only thing I know about Finland is that the real Santa-Claus is from there :p

You should have seen my E21. I'm not sure if it was as bad as yours, but friends called it holes with a little bit of steel around

But I will have to admit that you have done a great job!

Basso · Post by **Basso** » Tue Sep 26, 2006 5:19 pm

rolfi wrote:
Basso wrote: I dont speak swedish (i dont like that language )

ööhmmm some rost hole the hole back has been rebuilt!
but now it looks great..that picture you can see it has no rost at all (sandflow whit sand pistol ) http://img454.imageshack.us/my.php?image=184gr8.jpg and back of the picture you can see M3 e30 body work.. i built it

i try to keep it original ... mayby bbs front bunber. and original cromebumpers. thats all.
Okay then.
The only thing I know about Finland is that the real Santa-Claus is from there :p

You should have seen my E21. I'm not sure if it was as bad as yours, but friends called it holes with a little bit of steel around

But I will have to admit that you have done a great job!

I have seen the santa claus and i have a picture at it!!

hmmm.. i think at....in finland we have only rost cars....because winter and salt

Basso · Post by **Basso** » Wed Oct 11, 2006 1:08 pm

some new photos

engine and transmission has been removed and new engine have some new painted parts.

http://www.btcf.fi/forum/showthread.php?t=50793&page=14

hadrian · Post by **hadrian** » Wed Oct 11, 2006 1:40 pm

Coming along nicely. The white pulleys are a nice touch.

Basso · Post by **Basso** » Thu Nov 02, 2006 1:25 pm

new stuf:

new green color windows (All) back side windows are open unique version.

original aircooler mashine.

new Bilstein front and back.

öööh i am buying lowerin spings 60mmfront and 40 back. where i can buy those

. i found some http://www.edworthys.co.uk/product~ProdID~829838.htm

is those ventors springs good

new pictures comes soon to btcf....link

Basso · Post by **Basso** » Tue Jan 02, 2007 11:18 am

hmmm...

some ubdates....

325 clutch kit
bilstein suspension
H&R 40mm Springs
Harge Muffler
Alpina front bumber
rest of original aircooler parts have got.

Engine base have been painted in epoxy

...