
Alpina B6 2.8 #151- Topcat- Isle of Man
- TopCat
- E21 Pro
- Posts: 1079
- Joined: Thu Apr 21, 2011 2:21 pm
- My E21(s): 1980 Alpina B6 2.8
- Facebook page: https://www.facebook.com/timothy.c.boles
- Location: Isle of Man and Inverness
- Contact:
Re: Alpina B6 2.8 #151- Topcat- Isle of Man
Managed to resolve the indicator issue - bought new one from GSF - but some fiddling around with old one saw me experiment with some loose wires- and all is sorted
Still may have a problem with Number plate - unless I devote a lot of time and research -
see:
http://www.bmwe21.net/forum/viewtopic.php?f=3&t=21385
Or simply avoid the Docks carpark!
Still may have a problem with Number plate - unless I devote a lot of time and research -
see:
http://www.bmwe21.net/forum/viewtopic.php?f=3&t=21385
Or simply avoid the Docks carpark!
Regards
Topcat
Isle of Man Inverness
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 Hartge H26
Topcat
Isle of Man Inverness
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 Hartge H26
- TopCat
- E21 Pro
- Posts: 1079
- Joined: Thu Apr 21, 2011 2:21 pm
- My E21(s): 1980 Alpina B6 2.8
- Facebook page: https://www.facebook.com/timothy.c.boles
- Location: Isle of Man and Inverness
- Contact:
Re: Alpina B6 2.8 #151- Topcat- Isle of Man
Now as usual I am thinking of last minute changes prior to the Event in May La Vie en Bleu
typical
the thing is I fitted those RPM adjustable top mounts to give more neg camber
but with the original Alpina supsnesion back on it sits too high at the front (the thickness of the top mount)= around 3/4inch
thinking of lowering using Spax -60mm (about -2 1/4inch)
thing is would they fit since Herman has a 2.8 BB m30 in it- which must be heavier than the 2.3?
I would rather not go for coilovers- any suggestions please? It now rides and hnadles well enough- it just doesn't look quite right!
typical
the thing is I fitted those RPM adjustable top mounts to give more neg camber
but with the original Alpina supsnesion back on it sits too high at the front (the thickness of the top mount)= around 3/4inch
thinking of lowering using Spax -60mm (about -2 1/4inch)
thing is would they fit since Herman has a 2.8 BB m30 in it- which must be heavier than the 2.3?
I would rather not go for coilovers- any suggestions please? It now rides and hnadles well enough- it just doesn't look quite right!
Regards
Topcat
Isle of Man Inverness
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 Hartge H26
Topcat
Isle of Man Inverness
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 Hartge H26
Re: Alpina B6 2.8 #151- Topcat- Isle of Man
well I believe it really depends on the spring rates? what are the spring rates of the ones you have now?
the RPM do add a fair bit of height, but luckily I have coilovers and adjusted them accordingly.
I was wondering if you have had your car tested for exhaust noise levels? how loud is it?
the RPM do add a fair bit of height, but luckily I have coilovers and adjusted them accordingly.
I was wondering if you have had your car tested for exhaust noise levels? how loud is it?
[img]http://s13.photobucket.com/albums/a285/nasbucket/forumsig.jpg[/img]
- TopCat
- E21 Pro
- Posts: 1079
- Joined: Thu Apr 21, 2011 2:21 pm
- My E21(s): 1980 Alpina B6 2.8
- Facebook page: https://www.facebook.com/timothy.c.boles
- Location: Isle of Man and Inverness
- Contact:
Re: Alpina B6 2.8 #151- Topcat- Isle of Man
don't know at present!
The Spax guy is doing some research and will revert
Re noise- which car?
Butch is too noisy for many UK tracks- (I think 110 db at the MSA 3/4 m) we have additional backboxes that bolt on luckily IOM and Prescott allow more noise- Castle Combe, and Thruxton are very strict. Herman is fairly quiet but original Alpina Back box baffles are failing- not nice noise- I have a plan to fix same with MIJ in May
The Spax guy is doing some research and will revert
Re noise- which car?
Butch is too noisy for many UK tracks- (I think 110 db at the MSA 3/4 m) we have additional backboxes that bolt on luckily IOM and Prescott allow more noise- Castle Combe, and Thruxton are very strict. Herman is fairly quiet but original Alpina Back box baffles are failing- not nice noise- I have a plan to fix same with MIJ in May
Regards
Topcat
Isle of Man Inverness
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 Hartge H26
Topcat
Isle of Man Inverness
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 Hartge H26
- TopCat
- E21 Pro
- Posts: 1079
- Joined: Thu Apr 21, 2011 2:21 pm
- My E21(s): 1980 Alpina B6 2.8
- Facebook page: https://www.facebook.com/timothy.c.boles
- Location: Isle of Man and Inverness
- Contact:
Re: Alpina B6 2.8 #151- Topcat- Isle of Man
Went via MIJ in Walsall to have new stainless backboxes fitted- they have done a great job.
and the guy reckons he also did Alun Parry's B6 as well!
Sounds VG
I haven't gone for the full race ones as I thought they were a bit boomy= I will post up what Herman now sounds like
and the guy reckons he also did Alun Parry's B6 as well!
Sounds VG
I haven't gone for the full race ones as I thought they were a bit boomy= I will post up what Herman now sounds like
Regards
Topcat
Isle of Man Inverness
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 Hartge H26
Topcat
Isle of Man Inverness
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 Hartge H26
Re: Alpina B6 2.8 #151- Topcat- Isle of Man
You still have time to go to arnhem, netherland, to show us.

81 e21 323i polaris
That's a whole lott of engine under the bonnet;-)
That's a whole lott of engine under the bonnet;-)
- TopCat
- E21 Pro
- Posts: 1079
- Joined: Thu Apr 21, 2011 2:21 pm
- My E21(s): 1980 Alpina B6 2.8
- Facebook page: https://www.facebook.com/timothy.c.boles
- Location: Isle of Man and Inverness
- Contact:
Re: Alpina B6 2.8 #151- Topcat- Isle of Man
Sorry Guys - not even Herman can be in 2 places at once!
We are at Prescott H/C this weekend at La Vie En Rose
We are at Prescott H/C this weekend at La Vie En Rose
Regards
Topcat
Isle of Man Inverness
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 Hartge H26
Topcat
Isle of Man Inverness
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 Hartge H26
-
- Upcoming E21 fanatic
- Posts: 64
- Joined: Sun Apr 21, 2013 11:49 pm
- My E21(s): 82 uk ex 320 auto now m50 manual
- Location: dunstable
Re: Alpina B6 2.8 #151- Topcat- Isle of Man
nice car mate!
- TopCat
- E21 Pro
- Posts: 1079
- Joined: Thu Apr 21, 2011 2:21 pm
- My E21(s): 1980 Alpina B6 2.8
- Facebook page: https://www.facebook.com/timothy.c.boles
- Location: Isle of Man and Inverness
- Contact:
Re: Alpina B6 2.8 #151- Topcat- Isle of Man
fitted matching black leather with blue stitching handbrake gaitor and handle- suits the car as it matches the rest of the console etc
vmt J for the pix!
vmt J for the pix!
Last edited by TopCat on Sat Jun 21, 2014 11:12 am, edited 1 time in total.
Regards
Topcat
Isle of Man Inverness
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 Hartge H26
Topcat
Isle of Man Inverness
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 Hartge H26
- TopCat
- E21 Pro
- Posts: 1079
- Joined: Thu Apr 21, 2011 2:21 pm
- My E21(s): 1980 Alpina B6 2.8
- Facebook page: https://www.facebook.com/timothy.c.boles
- Location: Isle of Man and Inverness
- Contact:
Re: Alpina B6 2.8 #151- Topcat- Isle of Man
fitted matching black leather with blue stitching handbrake gaitor and handle- suits the car as it matches the rest of the console etcJeroen wrote:
vmt J for the pix!
Regards
Topcat
Isle of Man Inverness
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 Hartge H26
Topcat
Isle of Man Inverness
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 Hartge H26
-
- E21 starter
- Posts: 31
- Joined: Mon Jan 10, 2011 8:28 am
- My E21(s): e21 323i black
e21 323i baur ,black
+8 - Location: BIRMINGHAM,UK
Re: Alpina B6 2.8 #151- Topcat- Isle of Man
what a lovely and rare car
i love this tread!
who did the trimming is you don't mind me asking

i love this tread!
who did the trimming is you don't mind me asking
- TopCat
- E21 Pro
- Posts: 1079
- Joined: Thu Apr 21, 2011 2:21 pm
- My E21(s): 1980 Alpina B6 2.8
- Facebook page: https://www.facebook.com/timothy.c.boles
- Location: Isle of Man and Inverness
- Contact:
Re: Alpina B6 2.8 #151- Topcat- Isle of Man
Most of the car had already been trimmed= alcantara roof lining and the dashboard leather with blue stitching
A lovely chap called Alan did the door cards here on the IOM- he usually does custom leather motorcycle suits! He is now retired since he is almost 80!
I then bought the matching handbrake gaiter and handle here:
http://www.ebay.co.uk/itm/FITS-BMW-E30- ... 35d236d73b
A lovely chap called Alan did the door cards here on the IOM- he usually does custom leather motorcycle suits! He is now retired since he is almost 80!
I then bought the matching handbrake gaiter and handle here:
http://www.ebay.co.uk/itm/FITS-BMW-E30- ... 35d236d73b
Regards
Topcat
Isle of Man Inverness
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 Hartge H26
Topcat
Isle of Man Inverness
1980 BMW E21 Alpina B6 2.8
1991 BMW E30 Hartge H26