Starting problems

For all your questions, problems and DIY stories
Post Reply
User avatar
schroeder
Newbee
Posts: 13
Joined: Sun Jan 16, 2011 9:05 pm

Starting problems

Post by schroeder »

Any suggestions would be most welcome

I've an 82 323 e21 that has recently returned to the road after spending many years in my garage. A far bit of work has been completed including fuel pump, accumulator, filter, regulator, s/s exhaust, brakes , hoses, etc , etc but I have one problem that caused me to miss my ferry to this year's sharknose meet, and to this day continues to cause me stress. Albeit, a bit lumpy, i can start the car, drive it, however when I return, leave the car for an hour or so, it will not start, it'll turn but refuses to fire.

The following morning, it starts no problem.

Ahhhhhh


User avatar
Jeroen
Site Admin
Posts: 29994
Joined: Tue Sep 14, 2004 12:23 pm
My E21(s): '81 323i Baur
Location: The Netherlands
Contact:

Re: Starting problems

Post by Jeroen »

The horror! Did you ever check, during or after these failed startup attempts, if you had fuel, wet plugs, a spark? The lumpy start appears not to have anything to do with this but with adjustments. The warm start, I'd suspect the ignition pulse sender and control module first, and try to bypass the fuel pump relay perhaps?
Regards/groeten, Jeroen
User avatar
Mihajlo
E21 Pro
Posts: 549
Joined: Thu Aug 23, 2007 11:07 am
My E21(s): 1982 315swap323i
Location: Croatia - Rijeka
Contact:

Re: Starting problems

Post by Mihajlo »

It sounds like WUR to me...
Understeer is when you hit the wall with the front of the car. Oversteer is when you hit the wall with the rear of the car.
Horsepower is how fast you hit the wall. Torque is how far you take the wall with you.
User avatar
schroeder
Newbee
Posts: 13
Joined: Sun Jan 16, 2011 9:05 pm

Re: Starting problems

Post by schroeder »

Thanks Mihajlo's, I thought it was that too so had the regulator refurbished, but it didn't solve the problem.
groove groce
Newbee
Posts: 15
Joined: Fri Oct 24, 2014 9:12 pm
My E21(s): '83 US 320iS

Re: Starting problems

Post by groove groce »

I had a similar problem many years ago with a 4 cyl E21. It turned out to have something to do with "fuel pressure".
Post Reply