Negative camber

healeyneil · Post by **healeyneil** » Fri Jan 27, 2017 5:38 pm

Has anyone ever introduced a little bit of negative camber in their front suspension by moving the mounting point of the lower wishbone out by a few mm ? It would be easy to file out the hole, then weld washers in the correct place. As a road car I don't really want to fit adjustable struts and lose the insulation the std top mounts have. I just feel that mine almost has positive camber as it sits now
Cheers, Neil

healeyneil · Post by **healeyneil** » Sat Feb 18, 2017 12:55 am

Has no- one ever tried this ?

BertjeConti · Post by **BertjeConti** » Sat Feb 18, 2017 9:45 am

Yes, i did it that way, check my E12 tread:
look here
and here
for the full story

healeyneil · Post by **healeyneil** » Mon Feb 20, 2017 9:17 am

Thanks. That's moved more than I thought !

BertjeConti · Post by **BertjeConti** » Mon Feb 20, 2017 10:05 am

Yes, i needed it because the new wishbones i used are 5mm shorter as the stock ones, bad reproduction.

bmwe21.net forums

Negative camber

Negative camber

Re: Negative camber

Re: Negative camber

Re: Negative camber

Re: Negative camber