Page 1 of 1
E21 coilovers question.
Posted: Tue Aug 25, 2015 5:07 am
by whyismye21broke
I was just curious about GAZ coilovers. My E21 is stanced at the moment. Coilovers in the back. Cut springs in the front. When I put these GAZ coilovers on my car. Will they go low enough to keep my car at the height it is now. It sits very low. Basically what I'm asking is, will these coilovers be able to sit my car on the ground?
Re: E21 coilovers question.
Posted: Tue Aug 25, 2015 7:36 am
by LeeLee
Look up oldboygarage on Instagram my car is on gaz
Re: E21 coilovers question.
Posted: Tue Aug 25, 2015 11:36 am
by e21-Mark
You can also ask Gaz to cut the thread further, which is what they did when rebuilding my LEDA.
Re: E21 coilovers question.
Posted: Wed Aug 26, 2015 12:49 am
by e21-Mark
Re: E21 coilovers question.
Posted: Wed Aug 26, 2015 6:45 pm
by Jason_323i
Nope
The track control arms bottom out on the chassis rials before the car sump can sit on the ground
Re: E21 coilovers question.
Posted: Wed Aug 26, 2015 9:42 pm
by uwbuurman
Alright, here is the question I did not have asked before, but I should have. My English needs a boost every now and then. What is a coilover? Is it the whole "leg"? So shock and spring mounted together? Please educate me!
Re: E21 coilovers question.
Posted: Wed Aug 26, 2015 10:06 pm
by gazzab1978
a coilover is basically when the spring goes around the shock absorber,when most people refer to a adjustable coilover it usually refers to the fact you can wind the spring seats down the shock to alter the ride height.
some cars have shocks which bolt to the hubs and can be changed to adjustable coilovers without having to change the hubs, others likr the e21 have the shock inside a tube which is welded to the hub so when fitting adjustable coilovers they need to have a thread machined onto the existing suspension leg so that you can fit a adjustable spring seat onto the original leg.
hope this helps
Re: E21 coilovers question.
Posted: Wed Aug 26, 2015 11:21 pm
by uwbuurman
It does! Tnx!
Re: E21 coilovers question.
Posted: Thu Aug 27, 2015 4:59 pm
by jim h
Anyone know what the standard (out the factory ride height is for a 320 ?
Re: E21 coilovers question.
Posted: Sat Aug 29, 2015 9:51 am
by LeeLee
You want a factory Coilover to sit the car on the ground I dunno it's going to happen people who go that low usually just go customer straight out the gate