valve stem seals

For all your questions, problems and DIY stories
Post Reply
User avatar
cdavie2002
Upcoming E21 fanatic
Posts: 161
Joined: Fri Feb 27, 2009 10:52 pm
Location: Aberdeen, Scotland

valve stem seals

Post by cdavie2002 »

How big/easy a job is it to cure the problem of, or replace valve stem seals that leak slightly that cause a bit of a smokey start?


Chris
1982 320/6 (breaker)
1975 3.0 csi
1974 3.0 csi (donor)
2003 E46
mattymoo2
Newbee
Posts: 6
Joined: Tue Dec 30, 2008 6:52 pm
Location: weymouth

Re: valve stem seals

Post by mattymoo2 »

my car smokes just on start up and does smell a bit the rest of the time.Its a 320/6 only covering 40000 im hoping its just the valve seals.
Matthew
User avatar
thetomc
Upcoming E21 fanatic
Posts: 101
Joined: Mon Jul 16, 2007 4:48 pm
Location: West Midlands

Re: valve stem seals

Post by thetomc »

Head off. Plus a bit of fiddling with a valve spring compressor. Its not too difficult if your comfortable with taking the head off. plus, its an ideal oppurtunity to lap your valves in and have a general clean up of the valves and combustion chambers.
User avatar
tommi_e21
E21 Mad
Posts: 1536
Joined: Fri May 16, 2008 2:31 am
Location: letchworth sg61hy

Re: valve stem seals

Post by tommi_e21 »

also a very good learning experience and allows you to learn lots about the bmw head and how it works

I have a ssetof valve spring compressors if you need to borrow them
BMW e21 - 320tsi - Project Rajay
Audi 50 RS
1/2 a BMW 2002 tii - Project Nipon
Smart 4/2 84bhp cabriolet - Company car
User avatar
cdavie2002
Upcoming E21 fanatic
Posts: 161
Joined: Fri Feb 27, 2009 10:52 pm
Location: Aberdeen, Scotland

Re: valve stem seals

Post by cdavie2002 »

Thanks guys, im doing my homework on an engine i may buy. Cheers for helpful replies!
Chris
1982 320/6 (breaker)
1975 3.0 csi
1974 3.0 csi (donor)
2003 E46
Post Reply