Thermostat Change

For all your questions, problems and DIY stories
Post Reply
bee
Newbee
Posts: 4
Joined: Sat Jan 15, 2011 8:16 am

Thermostat Change

Post by bee »

Hey fellas,

I recently just bought a E21 323i and have attempted to service it myself, ive done all but adjust the valves and replace the rocker cover and plugs. Ive been learning using the forums however my temp gauge when driven hard rises to an uncomfortable level. Ive boiled it down to the fact that the previous owner pretty well never drove the car and the thermostat has frozen shut? if thats correct? Anyways I was wondering if anyone has any pictures on a DIY on a thermostat swap or repair? or any links?

Cheers,

Bee


2004 MkIV VW Golf R32 - Gone but never forgotten :(
1982 BMW E21 323i - My New Old Girl :)
bee
Newbee
Posts: 4
Joined: Sat Jan 15, 2011 8:16 am

Re: Thermostat Change

Post by bee »

Also! Anyone have any idea on where the fuel filter for the 323i is? such a pain in the arse to find! Any help regarding this would be amazing!
2004 MkIV VW Golf R32 - Gone but never forgotten :(
1982 BMW E21 323i - My New Old Girl :)
andy205
Upcoming E21 fanatic
Posts: 68
Joined: Thu May 27, 2010 9:16 pm
Location: Berkshire, England

Re: Thermostat Change

Post by andy205 »

Hi Bee, your best bet is to get a haynes manual, its an easy job, make sure you flush rad and hoses out. Andy :thumbsup
Where are you located?
Last edited by andy205 on Sat Jan 29, 2011 1:13 pm, edited 1 time in total.
User avatar
Lars-Nord
E21 Pro
Posts: 535
Joined: Sat Jul 18, 2009 2:33 pm
Location: Norway

Re: Thermostat Change

Post by Lars-Nord »

The fuel filter is inside of the right rear wheel. Together with the fuel pump.
81 e21 323i polaris
That's a whole lott of engine under the bonnet;-)
bee
Newbee
Posts: 4
Joined: Sat Jan 15, 2011 8:16 am

Re: Thermostat Change

Post by bee »

Cheers fellas! Im in Australia! Ill post some pics of my new girl soon! Shes beautiful!
2004 MkIV VW Golf R32 - Gone but never forgotten :(
1982 BMW E21 323i - My New Old Girl :)
User avatar
murran
E21 Pro
Posts: 1309
Joined: Fri Nov 09, 2007 9:20 pm
Location: sheffield

Re: Thermostat Change

Post by murran »

thermostat is in the coolant housing bolted on the front corner of the cyl head. theres 3 10mm bolts holding it on where the bottom rad hose mounts to the engine. the bleed valve is also on this aluminium housing. so you need to make sure it'll undo before stripping it. then bleed it from this point, after youve fitted a new 'stat, topping up the coolant till it comes out here.
Image
Jeroen wrote:Bmwe21.net, for all your insurance solutions :P
Post Reply