Brake master cylinder
- Dan323i
- Upcoming E21 fanatic
- Posts: 46
- Joined: Sat May 15, 2010 8:29 pm
- Location: Berkshire
- Contact:
Brake master cylinder
My car has just failed on a leaking master cylinder. Any idea where I can get one? Is it shared with any other BMWs such as an E30? Thanks in advance!
Re: Brake master cylinder
Yeah it will be, i've got one at the unit not doing anything but it's Nas's so you'll need to ask him for it. 
1986 E28 M535i - Car stripped to shell ready to be blasted
1981 E21 323i - 2.8 24v on throttle bodies & cams - 3.0 conversion soon.
[img]http://i3.photobucket.com/albums/y99/Arnold_the_swimmer/My%20M535i/IMG_0447sig-1.jpg[/img]
1981 E21 323i - 2.8 24v on throttle bodies & cams - 3.0 conversion soon.
[img]http://i3.photobucket.com/albums/y99/Arnold_the_swimmer/My%20M535i/IMG_0447sig-1.jpg[/img]
- Dan323i
- Upcoming E21 fanatic
- Posts: 46
- Joined: Sat May 15, 2010 8:29 pm
- Location: Berkshire
- Contact:
Re: Brake master cylinder
Heck, I've just given the garage the OK to order a genuine one from Germany! Ah well.
Re: Brake master cylinder
New is always best anyway.
1986 E28 M535i - Car stripped to shell ready to be blasted
1981 E21 323i - 2.8 24v on throttle bodies & cams - 3.0 conversion soon.
[img]http://i3.photobucket.com/albums/y99/Arnold_the_swimmer/My%20M535i/IMG_0447sig-1.jpg[/img]
1981 E21 323i - 2.8 24v on throttle bodies & cams - 3.0 conversion soon.
[img]http://i3.photobucket.com/albums/y99/Arnold_the_swimmer/My%20M535i/IMG_0447sig-1.jpg[/img]
- Dan323i
- Upcoming E21 fanatic
- Posts: 46
- Joined: Sat May 15, 2010 8:29 pm
- Location: Berkshire
- Contact:
Re: Brake master cylinder
You'd think so – the garage got one sent over from Germany and it's no good! Been sat on the shelf for years presumably and the seals are all hardened and no longer seal properly. They've taken it apart, soaked all the bits in fluid overnight and reassembled it and it still is not working properly. Maybe I should drop your mate Nas a line...
Re: Brake master cylinder
You could get new seals from biggred.co.uk
Re: Brake master cylinder
uused a master cylinder seal kit from biggred this week briliant service but the kit had the wrong reservoir
rubbers i ended up using the ones from a 98 e39
rubbers i ended up using the ones from a 98 e39
E21 323i [kashmere] Off the road pending restoration
E21 3231[Graphite metalic] Restoration and conversion to M52
E36 318i Had it nearly 10 years work in progress
E36 328i Daily driver
E39 520i Family car school run workhorse
E36 328i Touring
E21 3231[Graphite metalic] Restoration and conversion to M52
E36 318i Had it nearly 10 years work in progress
E36 328i Daily driver
E39 520i Family car school run workhorse
E36 328i Touring
Re: Brake master cylinder
Yes I had same problem, rung them and they matched them up and exchanged them...
How did you know the use the e39 ones and where did you get them?
How did you know the use the e39 ones and where did you get them?
Re: Brake master cylinder
got them from my e39 just lucky they fit
it was thanks to your post i found biggred too otherwise i would have had to get a new master
it was thanks to your post i found biggred too otherwise i would have had to get a new master
E21 323i [kashmere] Off the road pending restoration
E21 3231[Graphite metalic] Restoration and conversion to M52
E36 318i Had it nearly 10 years work in progress
E36 328i Daily driver
E39 520i Family car school run workhorse
E36 328i Touring
E21 3231[Graphite metalic] Restoration and conversion to M52
E36 318i Had it nearly 10 years work in progress
E36 328i Daily driver
E39 520i Family car school run workhorse
E36 328i Touring
Re: Brake master cylinder
No Problem. Glad it helped (almost).
I would have hoped they'd of sorted the kits by now, but at least they sorted it out when I contacted them..
I would have hoped they'd of sorted the kits by now, but at least they sorted it out when I contacted them..