E21 ICE install
- e21-Mark
- E21 Master
- Posts: 5715
- Joined: Fri Mar 21, 2008 2:19 pm
- My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
- Facebook page: https://www.facebook.com/JackyardBackoff
- Location: Cornwall - UK
E21 ICE install
Just wondered what (if any) ICE people are running in their cars?
In MIB I just ran JBL 6x4's in the 4 factory locations with a small boot mounted sub to give a bit more depth of sound. It always sounded fine for my needs anyway. I wanted to run something a little better this time but strictly on a budget.
I will have a Nakamichi CD45Z head unit and JBL 6x4's in the front footwell. I have a pair of Pioneer TS 6x9's for the rear parcel shelf but I'm unsure if they will fit without cutting the parcel shelf? I really don't want to do that but if I use spacers I'm not sure that they won't hit the rear screen?! (unfortunately I don't have an e21 here that I can test fit them in) Does anyone else run 6x9 rears?
So far, the whole system was less than £150 so I'm also thinking of using a slimline sub? I figured I could put one under the passenger seat. I really don't want a bloody great boot mounted thing anyway. Has anyone else used a slimline sub and are they any good?
I am yet to get myself an amp and am unsure what to go with? I'm after quality rather than quantity but don't want to spend loads. In fact, I'm quite happy to go with used so long as it still works. So any suggestions?
In MIB I just ran JBL 6x4's in the 4 factory locations with a small boot mounted sub to give a bit more depth of sound. It always sounded fine for my needs anyway. I wanted to run something a little better this time but strictly on a budget.
I will have a Nakamichi CD45Z head unit and JBL 6x4's in the front footwell. I have a pair of Pioneer TS 6x9's for the rear parcel shelf but I'm unsure if they will fit without cutting the parcel shelf? I really don't want to do that but if I use spacers I'm not sure that they won't hit the rear screen?! (unfortunately I don't have an e21 here that I can test fit them in) Does anyone else run 6x9 rears?
So far, the whole system was less than £150 so I'm also thinking of using a slimline sub? I figured I could put one under the passenger seat. I really don't want a bloody great boot mounted thing anyway. Has anyone else used a slimline sub and are they any good?
I am yet to get myself an amp and am unsure what to go with? I'm after quality rather than quantity but don't want to spend loads. In fact, I'm quite happy to go with used so long as it still works. So any suggestions?
- goldbmwe21323i
- Upcoming E21 fanatic
- Posts: 133
- Joined: Mon Apr 20, 2009 7:50 pm
- My E21(s): 1982 323i, E30 325i Cab
- Location: Wisbech Cambridgeshire
- Contact:
Re: E21 ICE install
Mark, many years ago i done similar to u. if i remember rightly the back shelf would need to be cut out to fit the 6x9. i also had a 3 way amp, tweeters on the door mirror covers, mids and bass on a board with the amps in the boot, replaced the kick speakers, and the sound was quality with a thumping bass. 
PURE E21!
Car Sales of all makes and models
www.crestmotors.co.uk
ON THE LOOK OUT FOR MY OLD ONE BLACK MHX117X
Car Sales of all makes and models
www.crestmotors.co.uk
ON THE LOOK OUT FOR MY OLD ONE BLACK MHX117X
-
harleytrike
- E21 Fanatic
- Posts: 415
- Joined: Sun Sep 25, 2011 12:43 am
Re: E21 ICE install
check out my pictures mark i made a parcel shelf for my 6x9s and they dont hit the window nor did i have to do any cutting




you need spacer rings 12mm mdf some bodyfiller spray glue acoustic carpet. in my car ive jl 6x4 in the kickwells jl twetters on the doors jl 6x9 rear shelf and a 10"vibe sub and its sounds awsome its not about what you got but how its all set up




you need spacer rings 12mm mdf some bodyfiller spray glue acoustic carpet. in my car ive jl 6x4 in the kickwells jl twetters on the doors jl 6x9 rear shelf and a 10"vibe sub and its sounds awsome its not about what you got but how its all set up
- e21-Mark
- E21 Master
- Posts: 5715
- Joined: Fri Mar 21, 2008 2:19 pm
- My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
- Facebook page: https://www.facebook.com/JackyardBackoff
- Location: Cornwall - UK
Re: E21 ICE install
How wide are the spacers?
-
harleytrike
- E21 Fanatic
- Posts: 415
- Joined: Sun Sep 25, 2011 12:43 am
Re: E21 ICE install
im buggered if i can remember
- e21-Mark
- E21 Master
- Posts: 5715
- Joined: Fri Mar 21, 2008 2:19 pm
- My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
- Facebook page: https://www.facebook.com/JackyardBackoff
- Location: Cornwall - UK
Re: E21 ICE install
Nakamichi cd400, 50p shaped sony sub in the boot, 5 channel amp and two jbl 2 ways in the original locations. it only likes to plays drum n bass.
planning on doing a better effort but way way way way down the priority list.
planning on doing a better effort but way way way way down the priority list.
[img]http://s13.photobucket.com/albums/a285/nasbucket/forumsig.jpg[/img]
- e21-Mark
- E21 Master
- Posts: 5715
- Joined: Fri Mar 21, 2008 2:19 pm
- My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
- Facebook page: https://www.facebook.com/JackyardBackoff
- Location: Cornwall - UK
Re: E21 ICE install
What sort of amp do I want to drive 2 6x9's, 2x6x4's and say an 8'' sub?
-
harleytrike
- E21 Fanatic
- Posts: 415
- Joined: Sun Sep 25, 2011 12:43 am
Re: E21 ICE install
depends on the watts of the speakers
- e21-Mark
- E21 Master
- Posts: 5715
- Joined: Fri Mar 21, 2008 2:19 pm
- My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
- Facebook page: https://www.facebook.com/JackyardBackoff
- Location: Cornwall - UK
Re: E21 ICE install
They're 160w. I'm not looking to enter any sound-offs with the Staines Massive so don't need mega bass innit. 
-
harleytrike
- E21 Fanatic
- Posts: 415
- Joined: Sun Sep 25, 2011 12:43 am
Re: E21 ICE install
A 4x50 powering the 6x4 & 6x9 and id have a 10" sub in the boot powered by a 250watt amp
- e21-Mark
- E21 Master
- Posts: 5715
- Joined: Fri Mar 21, 2008 2:19 pm
- My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
- Facebook page: https://www.facebook.com/JackyardBackoff
- Location: Cornwall - UK
Re: E21 ICE install
Cheers.
I think I'm going to go with a slimline sub that has it's own amp.
I think I'm going to go with a slimline sub that has it's own amp.
-
Reck
- E21 Pro
- Posts: 823
- Joined: Mon Mar 29, 2010 12:26 am
- My E21(s): 83 316, 1.8 M10, RHD
- Location: Manchester, UK
Re: E21 ICE install
I used a slimline sub with onboard amp in my last 316. It was one of the smallest I could find and it was still a very tight fit under the passenger seat (from memory I think it was 'monster' brand). Sounded great, but I had to mount it so the phono/power cables came out of the front of the seat (space constraints) - this meant passengers were kicking the jacks. It only last a couple of months before the jack sockets broke away from the circuit and the amp was dead. If I did it again I'd probably just go for something in the boot, wasn't worth the hassle.
- e21-Mark
- E21 Master
- Posts: 5715
- Joined: Fri Mar 21, 2008 2:19 pm
- My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
- Facebook page: https://www.facebook.com/JackyardBackoff
- Location: Cornwall - UK
Re: E21 ICE install
I don't do passengers and I'm deleting the back seat.
I guess I could fabricate some sort of shield though, just in case.
I guess I could fabricate some sort of shield though, just in case.
-
Reck
- E21 Pro
- Posts: 823
- Joined: Mon Mar 29, 2010 12:26 am
- My E21(s): 83 316, 1.8 M10, RHD
- Location: Manchester, UK
Re: E21 ICE install
Hah, I wish I didn't do passengers. If you're deleting the back seat you've got loads of room to mount it out of the way of destructive feet!