STEERING COLUMN
-
harleytrike
- E21 Fanatic
- Posts: 415
- Joined: Sun Sep 25, 2011 12:43 am
-
e21-Mark
- E21 Master
- Posts: 5715
- Joined: Fri Mar 21, 2008 2:19 pm
- My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
- Facebook page: https://www.facebook.com/JackyardBackoff
- Location: Cornwall - UK
Re: STEERING COLUMN
Well .
You have to grind off / cut the pressed studs that hold the top where your knees go. Undo the steering link universal joint, then undo the bolts that hold the bottom of the rack on.
It sounds simple but it's one of them jobs that results in a bad back.
You have to grind off / cut the pressed studs that hold the top where your knees go. Undo the steering link universal joint, then undo the bolts that hold the bottom of the rack on.
It sounds simple but it's one of them jobs that results in a bad back.
[img]http://s13.photobucket.com/albums/a285/nasbucket/forumsig.jpg[/img]
Re: STEERING COLUMN
Here's a good way to get the bolts off
[img]http://s13.photobucket.com/albums/a285/nasbucket/forumsig.jpg[/img]