Hi everyone,
I am new to the site so apologies if this topic has been posted already.
I recently picked up a 1982 E21 320. It came with the bbs front valance which I think is a bit too square. Does anyone know where I can find different valances/give any info for fitments (i.e if any valances won't fit onto the car due to model age etc.)
Also the chrome running around the front has been dented, is this cheap to replace/fix
Comments much appreciated
Thanks
L1nezy
Front Valances
- Jeroen
- Site Admin
- Posts: 29994
- Joined: Tue Sep 14, 2004 12:23 pm
- My E21(s): '81 323i Baur
- Location: The Netherlands
- Contact:
Re: Front Valances
Perhaps some people can share some photos of possible E21 front spoilers that fit your '82 facelift chassis. Some alternative options that come to mind: Alpina, Kamei X1, Zender.
As for chrome trim around the front, that was never there from the factory but I've seen it before. Sounds like the car had a creative previous owner that tried to imitate the chrome trim from more luxurious models like E23 7 and E24 6?
As for chrome trim around the front, that was never there from the factory but I've seen it before. Sounds like the car had a creative previous owner that tried to imitate the chrome trim from more luxurious models like E23 7 and E24 6?
Regards/groeten, Jeroen
Re: Front Valances
Hi Jeroen,
Thanks for the reply.
Ive attached a link to some photos of the car, hopefully it works. Apologies for the mix up, i was talking about the chrome bumper on the front.
https://onedrive.live.com/redir?resid=6 ... lder%2cjpg
Thanks for the reply.
Ive attached a link to some photos of the car, hopefully it works. Apologies for the mix up, i was talking about the chrome bumper on the front.
https://onedrive.live.com/redir?resid=6 ... lder%2cjpg
Re: Front Valances
I too would like to see a collection of front valances
- AndyBaur
- E21 Fanatic
- Posts: 282
- Joined: Thu Apr 21, 2011 11:10 pm
- My E21(s): 1983 320/6 Baur 5-speed (now gone)
- Location: 55* North
Re: Front Valances
Ah, he means there's a dent in the kidney grille.
This metal is pretty soft so with a bit of care it can be knocked back into shape. Don't try & remove the top notch though - it's supposed to be there to allow clearance for the bonnet!
This metal is pretty soft so with a bit of care it can be knocked back into shape. Don't try & remove the top notch though - it's supposed to be there to allow clearance for the bonnet!
AndyS
Live each day as if it's your last because one day it will be.
Live each day as if it's your last because one day it will be.