316/323 Body Shell Differences
Re: 316/323 Body Shell Differences
No VIN there,but 316 RHD 9/80 or newer. Hennared? Steel sliding roof mechanical,5-speed overdrive...Duracel79 wrote:
and a close up:
Regards
Ben
Re: 316/323 Body Shell Differences
Many thanks for that. So its a dash out job to get to it but at least I can just remove it.
Thanks for all your help!
Thanks for all your help!
Re: 316/323 Body Shell Differences
Yes this was a 1983 316 spec'd as you say.
As you probably know the stamped VIN number is on the (RHD) Drivers side inner wing.
On this shell there also was a stamped number on the other inner wing as well.
I'll have a check at what it was, should have a pic somewhere.
Here it is
As you probably know the stamped VIN number is on the (RHD) Drivers side inner wing.
On this shell there also was a stamped number on the other inner wing as well.
I'll have a check at what it was, should have a pic somewhere.
Here it is
1982 323i ("Test Mule" - to become an M20 powered track car)
1983 316 (Taiga Thunder - S54 Track car)
1982 635csiA (Another Weldathon)
2004 330d Touring (The Daily Hack / Tow Car / Load lugger)
1974 3.0 csi (The first Weldathon)
1983 316 (Taiga Thunder - S54 Track car)
1982 635csiA (Another Weldathon)
2004 330d Touring (The Daily Hack / Tow Car / Load lugger)
1974 3.0 csi (The first Weldathon)
Re: 316/323 Body Shell Differences
I believe that's the part number for the shell.