My little blue shark
Well, the longer wheel bolts arrived yesterday so today I set about fitting the front wheels. Got them all fitted, looked good & clearances seemed ok, set it back on the ground & tried to move her forward..... Little grinding noises ensued so I re checked the front & found that the track rod ends were grinding a little
there's now a 1mm deep furrow about 1/3 of the circumference of the inner wheel
They are touching too much to leave so I have removed the front wheels & ordered a set of 30mm spacers, I'll take the 20mm ones off the rear, put them on the front & put the 30mm ones on the rear. This will give me plenty of clearance & the wheels will sit nice in the arches.
Effectively I'll have 15 x 8 wheels with -5mm offset in the rear & +5mm offset in the front..... Need to save for the coilovers next month but will hopefully have them on by the end of Feb. I'll post some more piccies next weekend when I get all the wheels on & my brackets for the seats should be done by then so I'll fit them too.
Cheers Jamie
They are touching too much to leave so I have removed the front wheels & ordered a set of 30mm spacers, I'll take the 20mm ones off the rear, put them on the front & put the 30mm ones on the rear. This will give me plenty of clearance & the wheels will sit nice in the arches.
Effectively I'll have 15 x 8 wheels with -5mm offset in the rear & +5mm offset in the front..... Need to save for the coilovers next month but will hopefully have them on by the end of Feb. I'll post some more piccies next weekend when I get all the wheels on & my brackets for the seats should be done by then so I'll fit them too.
Cheers Jamie
1983 316..... Alive & well, let the modding commence! Now SOLD
- Sierpien
- E21 Fanatic
- Posts: 251
- Joined: Wed Feb 22, 2006 2:21 pm
- My E21(s): C1 Turbo Alpina tribute, 316 Sepiabraun
- Facebook page: https://www.instagram.com/fedecx5aa/
- Location: Uruguay
- Contact:
Cool!!!drjim wrote:I think they look too small, but they are basically 195/45 on a 15" wheel - which is what the slug is on. It's very much slammed, so that's how much your arches will be filled when you lower it.
My Fake E21 Alpina "C1 Turbo" tribute car!
"Sepiabraun" 1.8 M10 swapped 316
"I thought the block was good for 200, even 300 hp, but I never thought it would take 1000 horsepower."
Alex von Falkenhausen
"Sepiabraun" 1.8 M10 swapped 316
"I thought the block was good for 200, even 300 hp, but I never thought it would take 1000 horsepower."
Alex von Falkenhausen
Seeing as it's above freezing today (A whole 2degrees
) I decided to swap the wheels & spacers to finally see what it looks like with the Schmidts on & I must say that I really like the way it looks. I'm happy with how the wheels fit in the arches, it just needs seriously lowering now. Anyway here are the piccies I took




Front fitment



Rear fitment


And how it looks now



Here are some pictures of Harvey, not strictly anything to do with the build but I haven't put any pics of him on here






Hopefully I'll have enough cash at the end of the month to buy coilovers & get it sitting right.
Cheers
Jamie




Front fitment



Rear fitment


And how it looks now



Here are some pictures of Harvey, not strictly anything to do with the build but I haven't put any pics of him on here






Hopefully I'll have enough cash at the end of the month to buy coilovers & get it sitting right.
Cheers
Jamie
1983 316..... Alive & well, let the modding commence! Now SOLD
- --ALPINA--
- E21 Pro
- Posts: 1014
- Joined: Wed May 17, 2006 1:29 am
- Contact:
Are you going to be around on Sunday mate? I might be able to pop over then....drjim wrote:Wheels look great, get it lowered another 3cm and it'll look fab. Fancy swapping the MIMS for sundry engine bits and some cash?
I'm off work at the mo if you fancy a trip over.
Jim
1983 316..... Alive & well, let the modding commence! Now SOLD
More than you know mate, he's affectionately known as pig dog cos he's always grunting & snorting--ALPINA-- wrote:Hey thats no dog dude, thats a mutant gone severly wrong... or if not a hairy pig... but i like it!!
J
In nature he's more like a cat, he does exactly what he wants, when he wants & no amount of training has worked....
1983 316..... Alive & well, let the modding commence! Now SOLD
Sunday should work, will check with Sarah and PM you.
For some reason I want you to drop the front of the car to the floor but jack the back up with some massive profile rears on those wheels, bit like a dragster. Dunno why but I think it'd look fab!
Jim
For some reason I want you to drop the front of the car to the floor but jack the back up with some massive profile rears on those wheels, bit like a dragster. Dunno why but I think it'd look fab!
Jim
1983 316 Pustergrun - track sluG!
1982 Saphirblau Baur 325i
Cars all gone!
1982 Saphirblau Baur 325i
Cars all gone!
Lol mate, I'm thinking just slamming it all the way will work.drjim wrote:Sunday should work, will check with Sarah and PM you.
For some reason I want you to drop the front of the car to the floor but jack the back up with some massive profile rears on those wheels, bit like a dragster. Dunno why but I think it'd look fab!
Jim
Let me know about Sunday.
1983 316..... Alive & well, let the modding commence! Now SOLD
- e21-Mark
- E21 Master
- Posts: 5715
- Joined: Fri Mar 21, 2008 2:19 pm
- My E21(s): 316 m52/2.8 Cat Cams & Jenvey ITB
- Facebook page: https://www.facebook.com/JackyardBackoff
- Location: Cornwall - UK
- --ALPINA--
- E21 Pro
- Posts: 1014
- Joined: Wed May 17, 2006 1:29 am
- Contact:
Well you live and learn..... snort... :@)Marneus wrote:More than you know mate, he's affectionately known as pig dog cos he's always grunting & snorting--ALPINA-- wrote:Hey thats no dog dude, thats a mutant gone severly wrong... or if not a hairy pig... but i like it!!
J![]()
In nature he's more like a cat, he does exactly what he wants, when he wants & no amount of training has worked....
J
(- (- (- ---- Project 911 on the hunt ----) -) -)


